gates / gates (push) Successful in 6m59s
- 09 §3 decision 254 (operator decisions 240/243 written down); target-selection: a "lived-in" tier, Tier 0 = demo-hp alone; nodes.md role + drive; 11-os-updates ring 0 wording; CLAUDE.md + docs.md: the diary. - documentation/lived-in/n100.md (new diary); audits/n100-lived-in-2026-10-15/ (state, drive read, Part C capture sets, installs, wiring, stranger probes, demo-hp clean-up, the operator's SHEET.md). - Register: R-1062 (the split, operator decides), R-1063 (decommission half-state on an agent refusal), R-1064 (path removal silent about cross-drive copies), R-1065 (a claimed Plex gets no libraries until a wiring run). - demo-hp: /mnt/sizing-bench removed through the dashboard; the hub shows demo-hp OK (14:56 UTC). Claude-Session: https://claude.ai/code/session_0159rPz1ZhFKsS53msqPYxtS
93 lines
5.0 KiB
Markdown
93 lines
5.0 KiB
Markdown
# REPORT — the N100 becomes the lived-in box (2026-10-15)
|
|
|
|
Written in ASD-STE100 Simplified Technical English. Read first: `runbooks/target-selection.md`, `operations/nodes.md`,
|
|
`07-backup-architecture.md`, `15-media-library.md`, `09` §3 decisions 240, 243, 250. Evidence:
|
|
`documentation/audits/n100-lived-in-2026-10-15/`.
|
|
|
|
## What waits on you
|
|
|
|
1. **The sheet** (about 30 minutes): `documentation/audits/n100-lived-in-2026-10-15/SHEET.md`. Install and claim Plex;
|
|
make the admins in Prowlarr, Sonarr and Radarr; add download sources in Prowlarr; add one show and one film. Then say
|
|
„done". If you do nothing, the apps wait, safe behind their gate.
|
|
2. **Decide (R-1062):** the USB drive is also the box's whole-box backup drive. Split it anyway? My pick: **no, keep one
|
|
drive**. If you do nothing, it stays one drive.
|
|
|
|
## 1. The lived-in rule, and the files
|
|
|
|
`09` §3 **decision 254**:
|
|
- The N100 changes only through the product: the dashboard, the hub, the release train, the OS update rings.
|
|
- No deliberate failure without your word for that one act.
|
|
- Reads and observation are free. A problem goes into the diary and the register.
|
|
- It is not Tier 2. It is no longer „reach here first".
|
|
|
|
Decisions 240 and 243 point at it now.
|
|
|
|
Files changed:
|
|
- `architecture/09-update-architecture.md`;
|
|
- `runbooks/target-selection.md` (a new „lived-in" row; Tier 0 is demo-hp alone; the N100 section rewritten);
|
|
- `operations/nodes.md` (role and drive lines);
|
|
- `architecture/11-os-updates.md` (ring 0 no longer calls the N100 disposable);
|
|
- `CLAUDE.md` and `.claude/rules/docs.md` (one line each: the diary);
|
|
- `documentation/lived-in/n100.md` (new);
|
|
- `STATUS.md`, `CONTEXT.md`, the register.
|
|
- My own memory index: it called both demo boxes disposable.
|
|
|
|
## 2. What the N100 had, and what the 6 GB is
|
|
|
|
- Controller 0.314.0, agent 0.156.1. Guest: 12 GB of memory, 0.2 GB used. One app (opengist).
|
|
- The five media apps need about 2 GB by the estimator's rule. They fit.
|
|
- `/dev/dri`: the host has it, the guest does not. So Plex cannot use hardware transcoding today.
|
|
- **The USB drive is not only app test data.** It holds:
|
|
- 2.7 GB: the box's nightly whole-box backups (`dump/`). The host storage `felhom-backup` points at this drive.
|
|
- 3.1 GB: app backups and an off-site restore copy.
|
|
- 422 MB: leftovers of removed apps.
|
|
- Empty media folders.
|
|
|
|
There are no family files on it.
|
|
- **So I did not split it.** It is the box's whole-box backup target. The product refuses to retire such a drive, and the
|
|
box has no other drive to take that role. I also did not press the retire button. Reading the code showed that a
|
|
refused retire leaves the dashboard showing the drive as retired (R-1063).
|
|
|
|
## 3. Films and off-site — proven before any download
|
|
|
|
I ran the controller's own classifier on the deployed apps:
|
|
- off-site takes no media folder;
|
|
- the cross-drive tier would take only qBittorrent's downloads, and only if someone switches it on. It is off. With one
|
|
data drive it falls back to the internal SSD, and takes state only, not downloads;
|
|
- the whole-box backup's own log says: „excluding bind mount point mp8 ('/mnt/felhom-drives')".
|
|
|
|
## 4. What the box linked by itself
|
|
|
|
- I installed qBittorrent, Prowlarr, Sonarr and Radarr through the dashboard's own call, and sent no drive. Each was
|
|
healthy in under 35 s. The box picked `hdd_1` by itself.
|
|
- From the apps' own answers:
|
|
- Sonarr: `…/media/tv`. Radarr: `…/media/movies`. Both have the tag `hdd-1`, and qBittorrent as their client.
|
|
- qBittorrent: the categories `tv-hdd-1` and `movies-hdd-1`, saving under `…/media/torrents/` on the same drive.
|
|
- Prowlarr: linked to Sonarr and Radarr.
|
|
- A stranger meets the gate on Prowlarr, Sonarr and Radarr, and qBittorrent's own login.
|
|
- **Not done by itself:** a freshly claimed Plex gets no libraries until the next linking run (R-1065, from the code).
|
|
The sheet tells you what to press if it happens.
|
|
|
|
## 5. demo-hp's warning
|
|
|
|
Gone. I removed `/mnt/sizing-bench` through the dashboard, and the hub showed demo-hp **OK** at 14:56 UTC. The path held
|
|
two apps' cross-drive copies, and the dashboard said nothing about them (R-1064).
|
|
|
|
## 6. Wrong claims in the prompt; commits; register; STATUS
|
|
|
|
**Claims in the prompt that turned out wrong:**
|
|
1. „the 6.1 GB … app test data": it is mostly the box's own backups. The drive is the whole-box backup target, so the
|
|
split cannot go through the product.
|
|
2. „The box wires … Plex by itself": not right after the claim (R-1065).
|
|
3. „HD710 PRO": that is the USB enclosure. The disk inside is a TOSHIBA MQ04ABF100 (931.5 GB). True, but incomplete.
|
|
|
|
**Commits:** felhom.eu (this commit). No product code.
|
|
|
|
**Register:** before **152** · opened **4** (R-1062, R-1063, R-1064, R-1065) · closed **0** · after **156**.
|
|
|
|
**STATUS.md:** 61 lines.
|
|
|
|
**Teardown:** I installed four apps on the N100 on purpose (they stay). I deleted a temporary test file in the
|
|
controller tree; it was never committed. On demo-hp I removed one storage path. The hub was read only, through my token.
|
|
ep0, DooPlex and Tester 1 were not touched.
|