67 lines
9.0 KiB
Markdown
67 lines
9.0 KiB
Markdown
# STATUS — what works, what's broken, what's next
|
||
|
||
**Ready for the first real tester (Tester 2)? No — three morning yeses left:** release the controller (the restore put-back, the first-hour words), release and vouch the agent (the swap fix — the night soak says yes or no), deploy the hub. Tester 2 is off; nothing was sent to it.
|
||
|
||
**Updated 2026-10-22 (morning, after the night run).** A failed or cut restore now puts the household's data back and starts the app (proven on the scratch box); the first-hour texts are clearer; a host with too little swap is reported. All built and tested, nothing released.
|
||
|
||
## What works
|
||
- A box installs from nothing with the public installer, links to the hub, and moves to the floor by itself (map A1, A3, A4).
|
||
- 65 catalog apps install, update one tested step at a time, and a failed update undoes itself (map B1, B3, B4, B6).
|
||
- Backups: database dumps, a second-drive copy, an off-site copy and whole-box copies; restore tests run by themselves (map C1–C4, A17, A18).
|
||
- A restore brings an app back with its data and its database password; a failed or cut restore puts the app back as it was — off-site live, local on the test image (map C5, D6, D16).
|
||
- After a power cut the box starts by itself, cleans up a half-written backup, and Immich repairs broken photos (map C10, F12).
|
||
- A second drive is offered as the backup target; media apps see every drive; a one-disk box gets its own data area (map D1, D13, D15).
|
||
- The three test boxes answer only over https; the hub's key opens nothing on a box; password guesses are counted (map E12, E13, E17).
|
||
- The hub mails alarms and recoveries, and keeps one whole-box copy per week on ep0; CC uses its own limited token, not your password (map F1, F11, G15).
|
||
|
||
## What is broken
|
||
- **P1:** the 8 GB box can freeze for minutes under big uploads until the agent with the swap fix is released (R-1192; the night soak result is in the morning list).
|
||
- **P1:** about 12 homelab logins still use a password that was public, and the public Gitea repo is not decided (R-925, yours).
|
||
- Two root-level weaknesses wait on your decisions D3 and D4 (R-985, R-982).
|
||
- Tester 2 is off since 2026-10-04: old emergency password, no off-site check, no bootstrap (R-1139, R-1104, R-862).
|
||
- DooPlex: the failed disk is still in the box, its alarms silenced (R-934); something sets the shared checkout to „bare" (R-935).
|
||
- The scratch box cannot use agent features (R-1083) or read the drill catalog (R-992).
|
||
|
||
## What we work on
|
||
- Dated checks, run by CC. 2026-10-21 done: the hub's own off-site check found nothing wrong (R-895); downloads stay out of the second-drive copy (closed). 2026-10-23: no app stop when the host is busy (R-1173). 2026-10-26: each hub daily job ran once on the clock-change day (R-1183). 2026-10-27: the weekly clean-up window (R-435; the logs of the last one were lost to restarts).
|
||
|
||
## Waiting on you — decide
|
||
|
||
Newest first. CC's pick is in the „Pick" column. Each row also has its full text in the register.
|
||
|
||
| # | Row | Question | Pick (why) | The other option costs | If you do nothing | Blocked |
|
||
|---|---|---|---|---|---|---|
|
||
| D27 | R-1207 | A host with no swap gets nothing from the swap fix, and the agent never adds swap. Add host swap automatically (BYO too), or refuse an 8 GB host without swap at install? | **Report only for now** (our installer gives 7.75 GB; the alarm and the install-page sentence now tell you) — decide after the first BYO box | Add it: the agent changes a disk its owner set up; refuse: a BYO household cannot start | a no-swap host can still freeze; you get the alarm | — |
|
||
| D21 | R-49 | Immich's off-site copy: leave out only the AI model files now (B), or also the raw database folder and Immich's own backups (A)? | **B now** (−62 %, no new risk); A's other parts after their proof | A: −92 %, but it needs a restore path we have never run | every Immich box sends about 12 times its real data off-site each night | — |
|
||
| D9 | R-1062 | Split the N100's USB drive in two, for multi-drive tests? | **No — keep one drive** (the lived-in box keeps its nightly whole-box backup) | Split: the box loses its local whole-box backup, or you buy a second drive first | it stays one drive; multi-drive tests stay on Tester 1 | — |
|
||
| D8 | R-206 | Install DooPlex's Docker settings from git (Docker restarts once), with a weekly build-cache prune? | **Yes, in a quiet window** (a rebuilt DooPlex then keeps the settings) | No: the live settings stay hand-made, and a rebuild loses them | git and the host can drift apart | — |
|
||
| D7 | R-990, R-989 | Rule on the forum ideas and the selfh.st ideas now, or park them? | **Park them** (P4; nothing waits on them) | Rule now: about one hour of reading | nothing changes; the research gets old | — |
|
||
| D6 | R-992 | The scratch box cannot read the private drill catalog: give it a read-only login, or make that copy public? | **A read-only login** (the drill catalog stays private) | Public copy: anyone can read the drill catalog | every new-app test needs staging by hand | new-app tests |
|
||
| D5 | R-991 | Approve the minimum machine: x86-64, 4 cores, 8 GB RAM, 256 GB SSD (recommended: 16 GB, 512 GB)? | **Approve** (measured on the N100 with 61 apps) — **but wait for R-1192**: an 8 GB box froze on its first afternoon, 2026-10-20 | Change it: one edit | no hardware page; a buyer with a Raspberry Pi can still download the installer | the hardware page |
|
||
| D4 | R-982 | Stop root SSH with a password from the household network (key only)? | **Yes — key only** (the password stays for the console) | Keep it: anyone on the household network can try the password | the host keeps accepting root password logins from the LAN | — |
|
||
| D3 | R-985 | Our „zero-knowledge" wording is stronger than the product: change the wording, or remove the operator's root reach to the key? | **Change the wording now**; look again after the first sale | Remove the reach: a design change to break-glass | the website promises more than the product does | the website text |
|
||
|
||
## Waiting on you — do
|
||
|
||
**Still needed? (yes/no)** — CC could not check these. Answer yes or no per line.
|
||
1. Look at `roms/roms/` on the N100's drive in the file manager (R-1099). Since 2026-10-16.
|
||
2. The N100 sheet, about 30 minutes: Plex, the admins in Prowlarr, Sonarr and Radarr, your download sources (`documentation/audits/n100-lived-in-2026-10-15/SHEET.md`). Since 2026-10-15.
|
||
3. Look at these pages on demo-hp when you have time: Calibre-Web („Adatok és mentés"), the file manager, AdventureLog, Plex, the app page, the Plex and Sonarr guides („Útmutató"). Since 2026-10-16. Today's rehearsal screenshots: `documentation/audits/rehearsal-2026-10-20/screens/`.
|
||
4. Remove the test server „plex-k6" from your Plex account (plex.tv → Settings → Authorized Devices). Since 2026-10-15.
|
||
5. Ask Google to index `https://felhom.eu/sajat-felho-tarhely` in Search Console (R-1035). Since 2026-10-14.
|
||
6. BIOS: on the N100, read „After Power Loss"; on the HP, set „Bypass F1 Prompt on Configuration Changes" to Enable. Since 2026-10-14.
|
||
7. Pin the first Facebook post (R-917), and look at the new cover in the Facebook phone app (R-919). Since 2026-10-12.
|
||
|
||
**Morning list, 2026-10-22.** CC decided one thing (you may reverse it): a box tells the hub the notification list its page shows, even if never saved (R-1199; the rehearsal household got 1 alarm of 9).
|
||
1. Release controller 0.338.0 (restore put-back incl. power cut, first-hour words, swap sentence)? On the scratch box a damaged backup and a killed controller both kept the newest data and the app running (R-1177, R-1195, R-1178, R-1180).
|
||
2. Release and vouch agent 0.162.0 (swap = RAM, host-swap check, no false door alarm — R-1192, R-1194)? The soak result is in the night report.
|
||
3. Deploy hub 0.164.0 (host-swap alarm, bind-page words)?
|
||
4. Tester 2's laptop: our installer or its own Proxmox? (Does it have host swap?)
|
||
5. A publish: the website download button (patch ready), and with the next ISO the boot text and the cleared screen (R-1210). Secrets: keep or remove the `REHEARSAL_2026_10_20_*`, `FIXES_2026_10_21_*`, `NIGHT_2026_10_21_*` names in sec.
|
||
**The rest**
|
||
- Pull the failed disk Z6A07P2G out of DooPlex (R-934); it is still in. If not: its alarms return on 11 November. Since 2026-10-12.
|
||
- Rotate the reused homelab logins and decide the Gitea repo's visibility (R-925, P1). Since 2026-10-09.
|
||
- Two leftovers on DooPlex: keep, commit or delete the Facebook `first-post/` folder in `/mnt/5_hdd/felhom.eu/leftovers/2026-10-14/`; commit or drop the `deny`-list edit in `~/git/homelab-manifests/.claude/settings.json`. If not: they stay. Since 2026-10-14.
|
||
- Before the first paying customer: Tandoor's permission (R-789); a lawyer for the licence list and the terms (R-802, R-813); SparkyFitness by e-mail (R-784); print the break-glass sheet and the signing keys (R-923, R-924).
|
||
- Later (yours, not urgent): R-862 (Tester 2's bootstrap, when it is back), R-504, R-1071, R-1073, R-1077, R-1042, R-132, R-908, R-779, R-904, R-232, R-433, R-933, R-213, R-832, R-388, R-882, R-883, R-814, R-1056, R-1164, R-930, R-920, R-902.
|