Files
felhom.eu/STATUS.md
T
admin 59dad0030b
gates / gates (push) Successful in 2m7s
release 4 is out (2026-11-19/20): report, evidence, golden 0.354.0 record, register (R-1411 filed, R-1370 closed; R-1374/R-1379/R-1376/R-1398 dated), status, decisions 317-319, 07 §8.2f live, capability map C18
Hub 0.183.0 live; controller 0.354.0 global floor; golden 0.354.0 vouched; installer 1.38.0 tagged and published.
The notice, take-back, second press and an address change proven on the test household demo-hp; the removal itself
is first read on 2026-12-22 (DUE-CHECKS).

Claude-Session: https://claude.ai/code/session_0159rPz1ZhFKsS53msqPYxtS
2026-11-20 08:52:20 +01:00

66 lines
9.5 KiB
Markdown
Raw Blame History

This file contains ambiguous Unicode characters
This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
# STATUS — what works, what's broken, what's next
**Ready for Tester 2? Yes — tell the friend go (`documentation/pilot/TESTER2-handover.md`).**
**Updated 2026-11-20.** Release 4 is out: hub 0.183.0, controller 0.354.0, golden 0.354.0, installer 1.38.0; the deletion notice and its take-back were proven on demo-hp (`REPORT-release-4-2026-11-19.md`). The deletion itself is first seen 2026-12-22.
## What works
- **The Plex attack did not reach Felhom's secrets** (R-1241).
- A box installs from nothing with the public installer, links to the hub, and moves to the floor by itself (map A1, A3, A4).
- 66 catalog apps install, update one tested step at a time, and a failed update undoes itself (map B1, B3, B4, B6).
- Backups: database dumps, a second-drive copy, an off-site copy and whole-box copies; restore tests run by themselves (map C1–C4, A17, A18).
- A restore brings an app back with its data; a failed or cut restore puts it back as it was; one that does not start says so (map C5, D6, D7, D16).
- After a power cut the box starts by itself and cleans up a half-written backup (map C10, F12).
- A second drive is offered as the backup target; media apps see every drive (map D1, D13, D15).
- The three test boxes answer only over https; the hub's key opens nothing on a box (map E12, E13, E17).
- A hacked app that uploads or computes more than it explains alarms only you (map F13).
- An urgent security fix reaches the boxes at night after one test on the test box; the box backs up first and undoes a failed update (map B23).
- The hub mails alarms and recoveries and keeps a weekly whole-box copy on ep0 (map F1, F11, G15).
## What is broken
- **P1:** any hacked app on DooPlex can read the hub's nightly backups, and maybe the signing keys (R-1241, homelab session); about 12 homelab logins still use a password that was public, and the public Gitea repo is not decided (R-925, yours).
- Tester 2 off since 10-04: old emergency password, no off-site check, no bootstrap (R-1139, R-1104, R-862). Scratch box: no agent features (R-1083).
- DooPlex: something sets the shared checkout to „bare" (R-935).
- A box's event is lost if the hub is away for 9 seconds; a DooPlex restart can swallow a mail (R-1361).
## What we work on
- HTTP2Shell waiters: cal.com, Calibre-Web, RomM have no fix; SparkyFitness has one on a new main version (R-785, behind R-784).
## Waiting on you — decide
Newest first. CC's pick is in the „Pick" column. Each row also has its full text in the register.
| # | Row | Question | Pick (why) | The other option costs | If you do nothing | Blocked |
|---|---|---|---|---|---|---|
| D91 | R-1410 | **Answer today.** The scrambled form of the hub's FIRST password has been in the public repository since 2026-02-16, and the hub has no limit on wrong tries. Did you change the hub password on the Configuration page after that date — and will you change it now in any case? | **Change it now** (one minute on the Configuration page; then the public value opens nothing while the stored one is readable. CC could not read which password is live) | keep it: if the February password is still the live one, a stranger can guess at it offline with no trace, and it opens everything, the boxes' emergency passwords too — then R-1410 is a P1 | the same as „keep it” | the hub fix task (hash out of git, try limit, sign-out) |
| D90 | R-1422 | A taken-over hub can today give any claimed box a new reset code (and so a new dashboard password), and can choose where a box takes its apps from. Close this by design, or accept it for the beta? | **Close it** (a reset of a claimed box, and a change of the box's app source, need your signature, like an agent update; the hub then cannot do either alone) | accept: nothing is built; we write into the threat model that the hub alone can take over dashboards, and the security text for customers must not say otherwise | it stays as it is, and no document says so; the next reader files it again | the design note for R-1422; nothing else |
| D89 | R-1374 | Send one mail to the OLD notification address at EVERY change of a household's notification address — not only while an off-site deletion waits? | **Yes** (the reviewer's reading: a person with the login changes the address FIRST and presses after, so a mail only while a deletion waits would never go) | no: nothing new is mailed and no old address is kept; such a person gets the notice himself | as built: only the address of the day is told | — |
| D66 | R-1365 | Should a security-watch source that stays down mail again every 7 days, as an open notice does? Today it mails once, then only the Monday summary lists it. | **Yes** (a real outage then cannot be forgotten; the seven pins that can never be read no longer count, so it stays quiet when all is well) | no: one line in a long Monday mail stays the only reminder | a source that stays down mails once; the Monday list still shows it | — |
| D38 | R-1235 | Put the newest golden (637 MB) into the nightly release copy on ep0 too? | **Yes** (a new install after a DooPlex loss needs it; it fits under the 3 GB cap) | leave it out: after a loss, no new install until a golden is rebuilt and vouched | the same | — |
| D37 | R-1236 | Raise Gitea's memory limit from 1 GiB to 2 GiB? It was killed for memory 4 times in 17 days, once during today's release. | **Yes** (DooPlex has the RAM; a DooPlex change, so yours) | keep 1 GiB: a restart in release hours fails box updates and CI for a minute | the same | — |
| D9 | R-1062 | Split the N100's USB drive in two, for multi-drive tests? | **No — keep one drive** (the lived-in box keeps its nightly whole-box backup) | Split: the box loses its local whole-box backup, or you buy a second drive first | it stays one drive; multi-drive tests stay on Tester 1 | — |
| D7 | R-990, R-989 | Rule on the forum ideas and the selfh.st ideas now, or park them? | **Park them** (P4; nothing waits on them) | Rule now: about one hour of reading | nothing changes; the research gets old | — |
## Waiting on you — do
**2026-11-20 (release 4).** 1. Hosts page: discard appliance 59 and delete host Tester4-6e517f (CC's proof VM; else it alarms). 2. Release 4 ends the order of decision 306: the next step is yours. 3. CC reads demo-hp's window on 11-24 (must refuse) and 12-22 (the deletion; R-1374). **2026-11-15.** Once: read each off-site sub-account's label against the hub's list (R-1375). **2026-11-11.** 2. Hosts page: discard `3fb5fed3…`. 3. Rotate login `kisfenyo`'s Gitea token into the store as `GITEA_GIT_TOKEN` (R-925); the push after `sec put` is in R-1390. 4. Home DNS: remove the `felhom.eu` override (R-1389). 5. Read the dates only you can read (R-1381). 6. Search Console read (R-1035, 11-18).
**Still needed? (yes/no)** — answer per line.
1. Look at `roms/roms/` on the N100's drive in the file manager (R-1099). (since 10-16)
2. The N100 sheet, about 30 minutes: Plex, the admins in Prowlarr, Sonarr and Radarr, your download sources (`documentation/audits/n100-lived-in-2026-10-15/SHEET.md`). (since 10-15)
3. Look at these demo-hp pages when you have time: Calibre-Web, the file manager, AdventureLog, Plex, the app page, the Plex and Sonarr guides. (since 10-16)
4. Remove the test server „plex-k6" from your Plex account (plex.tv → Settings → Authorized Devices). (since 10-15)
5. Ask Google to index `https://felhom.eu/sajat-felho-tarhely` in Search Console (R-1035). (since 10-14)
6. BIOS: on the N100, read „After Power Loss"; on the HP, set „Bypass F1 Prompt on Configuration Changes" to Enable. (since 10-14)
7. Pin the first Facebook post (R-917), and look at the new cover in the Facebook phone app (R-919). (since 10-12)
**2026-11-03.** To the homelab session: R-1355.
**2026-10-30.** On the hub's Hosts page: Discard the appliance of 10:44:59 (uuid d3529d2d…) and appliance 49 (CC's proof VMs). If not: dead entries alarm. **2026-10-29 (release run).** 1. (since 10-28) Give the homelab session `audits/http2shell-2026-10-27/HOMELAB-LIST.md` (19 images, R-1328). If not: DooPlex keeps the bad runtimes.
**2026-10-23 do list.**
1. Print the break-glass sheet (`documentation/runbooks/break-glass-sheet.md`, the part from „The sheet”, one A4), fill it by hand, keep it outside the home (D32; R-923, R-924). If not: after a DooPlex loss no off-site copy opens.
2. Give the homelab session R-1241, R-1242, the lists at the end of `documentation/audits/plex2shell-felhom-impact-2026-10-23/README.md` and `documentation/audits/dooplex-alarms-2026-10-24/README.md`, and an upload alarm on DooPlex's `eno1` (~100 Mbit/s line; the flood peaked at 905). If not: the next hacked app on DooPlex can read the hub's backups.
**The rest**
- System poster needs a refresh: the new 01:40 „release copy” arrow from DooPlex to ep0 (D33); the website now on Cloudflare, only its mail form on DooPlex (D35). If not: the drawing is out of date.
- Rotate the reused homelab logins and decide the Gitea repo's visibility (R-925, P1). (since 10-09)
- Two DooPlex leftovers: `leftovers/2026-10-14/first-post/` (keep or delete); the `deny`-list edit in homelab-manifests' `.claude/settings.json` (commit or drop). (since 10-14)
- Before the first paying customer: Tandoor's permission (R-789); a lawyer for the licence list and the terms (R-802, R-813); SparkyFitness by e-mail (R-784).
- Later (yours, not urgent): R-1248 (a hard upload cap per app), R-1229 (ArgoCD's sync settings into git), R-862 (Tester 2's bootstrap, when it is back), R-504, R-1071, R-1073, R-1077, R-1042, R-132, R-908, R-779, R-904, R-232, R-433, R-933, R-213, R-832, R-388, R-882, R-883, R-814, R-1056, R-1164, R-930, R-920, R-902.