os.Rename() fails with "device or resource busy" on bind-mounted files.
Fall back to direct os.WriteFile when rename fails.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
New endpoint returns raw controller.yaml content (text/yaml) for Hub
live diff and pull operations. Same auth as other config endpoints.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Add config apply endpoint and config hash in reports to REST API
section, roadmap, and changelog.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
When both flags are provided, the wizard downloads a pre-configured
controller.yaml from the Hub API, extracts key variables for subsequent
setup steps, and skips the interactive wizard entirely. Falls back to
manual wizard on failure.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Phase 1: Deprecate restic as Tier 2 method (rsync only), auto-migrate on startup
Phase 2: Enhanced per-app migration with backup awareness, DB dump copy, auto-cleanup
Phase 3: Full drive migration with decommissioned state, rollback support, wizard UI
Phase 4: Hub report includes decommissioned drive state
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Add StorageBars to backupsHandler so all registered storage paths appear
- Update backups.html to use StorageBars loop (replacing single HDDConfigured block)
- Rename "SSD (/)" → "Rendszer (/)" on backup, monitoring, and dashboard pages
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
New Settings wizard to attach drives with existing filesystems without
formatting. Mounts partition at staging path, lets user browse and pick
a subfolder, then bind-mounts it at /mnt/<name> with fstab entries.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Tier 2 cross-drive backup now configurable for all apps (not just HDD apps)
- Non-HDD apps (Mealie, Gokapi) can back up config + DB to secondary drive
- Status dot: removed "auto" gray — all apps start yellow, green = 2+ tiers OK
- Backup page: Tier 2 row always shown, Tier 3 placeholder added
- Deploy page: cross-drive config visible for all deployed apps
- Meta badges: non-HDD apps show "Konfig" or "Konfig + DB" instead of "Auto"
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Cross-drive now copies DB dumps (_db/) and config (_config/) alongside user data
- restic cross-drive includes config dir + full DB dump dir
- UI: per-tier rows (1. mentés / 2. mentés) instead of per-layer (DB/Konfig/Data)
- UI: BackupContents label shows what each tier protects (DB + Konfig + Adatok)
- UI: rsync backups show browsable indicator (📁)
- Cleanup: removed unused filterSnapshotsByPaths + pathCovers from router.go
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Fix 1: HDD data backup is now mandatory for all deployed apps.
resolveAppBackupPaths() iterates ListDeployedStacks() directly — no
longer reads GetAppBackupMap() or checks the Enabled flag. DiscoverAppData()
drops backupPrefs parameter; BackupEnabled is set from HasHDDData.
Five dead settings methods removed: IsAppBackupEnabled, SetAppBackup,
GetAppBackupMap, SetAppBackupBulk, GetAppBackupPrefs.
Fix 2: Cross-drive backup now triggers a fresh DB dump (DumpStackDB)
before running. DBDumper interface added to crossdrive.go; Manager
implements it; SetDBDumper wired in main.go. Non-fatal — proceeds with
user data backup even if DB dump fails.
Fix 3: Restore dropdown shows ALL deployed apps (not just HDD+enabled).
restore.go rewritten: always restores config+DB, adds user data if hasHDD.
UI shows restore type banner (full / config+DB / config only) with
color-coded styling. Snapshot API clarified for non-HDD apps.
Fix 4: "Docker kötetek" → "Konfiguráció" — named volumes are not in
the restic backup paths; compose files + app.yaml are what's backed up.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Two rsync bugs found during Immich cross-drive backup testing:
Fix 3: Simplified destination path structure in runRsyncBackup.
Old SplitN logic kept "storage/immich" as a subpath, creating redundant
nesting: backups/rsync/immich/storage/immich/<data>. New logic: single
mount → rsync directly into the stack folder; multiple mounts → use
each mount's leaf dir name as subfolder (disambiguated by _N suffix).
Fix 4: Exclude app-internal DB dump files from rsync. Apps like Immich
store periodic pg_dumps in <data>/backups/*.sql.gz. The controller
already handles DB backups via pg_dump — copying them again wastes space.
Added --exclude backups/*.sql.gz/sql/dump to the rsync command.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Fix cross-drive backup failing for system-drive destinations. The
/mnt/hdd_placeholder folder is on the internal SSD, so IsMountPoint()
returned false and the old code hard-blocked it.
- ValidateDestination() (crossdrive.go): onSystemDrive flag replaces
boolean-only check; system drives require ≥10 GB free and <90% usage
to protect OS stability; external drives just need ≥100 MB free.
- CheckBackupDestination() (mounts_linux.go): Tier 4 now branches on
h.SystemDrive; system drive blocks at <10 GB free or ≥90% usage
(matches runner enforcement); external drive unchanged (warn 90%,
block 95%). Removes the && h.Severity == "ok" guard that was
preventing system-drive critical messages from overriding warnings.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- StackDataProvider interface extended with StopStack/StartStack
- backup.Manager.GetStackHDDMounts() delegates to stackProvider
- RestoreApp() auto-stops app before restic restore, restarts after (even on failure)
- stackAdapter in main.go wires StopStack/StartStack through to stacks.Manager
- GET /api/backup/snapshots?stack={name} filters snapshots by app HDD paths via filterSnapshotsByPaths()
- Restore section simplified: no path list, per-app filtered snapshots, human-friendly timestamp format, single calm warning, empty-result inline message
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
Bug fixes:
- GetFullStatus() returns deep copy; CrossDriveSummary/UnconfiguredApps/CrossDriveWarnings
are always nil in the copy so the handler builds them fresh (fixes duplicate-apps bug)
- Replace binary IsMountPoint check with tiered CheckBackupDestination() — path-not-exist,
not-writable, system-drive (warning), disk >90-95% full; shown as warning vs critical
- Remove dead settingsAppBackupHandler / POST /settings/app-backup route (toggle wrote
to settings.json but nothing consumed the flag)
Architecture:
- Unified per-app backup rows: new AppBackupRow struct + buildAppBackupRows() replaces
the two old sections with expandable rows showing all 3 layers per app
- Sequential backup chaining: cross-drive runs immediately after restic (removed
independent cross-drive-daily/cross-drive-weekly scheduler jobs)
- Deploy page: remove "Csak kézi indítás" schedule option; add weekly consistency note
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
- Detect stale data on non-active storage paths after migration; show on
deploy/settings page with size info and two-step delete confirmation
- Add POST /api/storage/stale-cleanup handler with safety checks (active
path protection, registered-path validation, ProtectedHDDPaths guard)
- Export ProtectedHDDPaths() from stacks package for reuse in web handlers
- Sync FileBrowser mounts after successful app data migration
- Deploy page title/h2 now shows "Beállítások" for already-deployed apps
instead of always showing "Telepítés"
- Also add delete-old-data button on migration-done card in migrate.html
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
- Startup ping: fire heartbeat + health + hub report immediately on boot
(5s delay after scheduler start, instead of waiting 5-15 min for first tick)
- Storage init wizard: new internal/storage/ package with disk scanning
(lsblk -J), format+mount pipeline (sfdisk → mkfs.ext4 → blkid → fstab →
mount → chown), safety guards (system disk detection, confirmation "FORMÁZÁS"),
progress channel, auto-register in settings.json
- Data migration: MigrateAppData() with rsync --info=progress2 progress parsing,
stop/rsync/update-config/start flow, rollback on failure, old data preserved
- New pages: /settings/storage/init (wizard), /stacks/{name}/migrate (migration)
- New API routes: /api/storage/{scan,init,init/status,migrate,migrate/status}
- Deploy page: storage info section for deployed apps (path, size, free, migrate link)
- Settings page: "Mozgatás" button per app in storage path details
- Container: privileged: true, /dev:/dev, /etc/fstab:/host-fstab, /run/udev:/run/udev:ro
- Dockerfile: add util-linux, e2fsprogs, rsync, parted for disk ops
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Health severity fix: mount-point check downgraded from issue (FAIL) to warning (WARN)
- All storage health messages translated to Hungarian
- Success flash messages for all storage operations
- Edit storage path labels (inline edit UI + backend)
- App details per storage path on settings page (expandable list with names + sizes)
- Storage badge on stacks page showing which storage each app uses
- Deploy dropdown with free space display and low-space warning (<20%)
- Filesystem & disk info on settings page (ext4/btrfs, device, model via findmnt)
- Backup page storage context with per-app storage label badges
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Fix backup toggles not appearing (read each app's own HDD_PATH from app.yaml)
- Storage paths registry in settings.json with auto-discovery from deployed apps
- Settings page "Adattárolók" section with disk usage, add/remove/default/schedulable
- Deploy page path field as dropdown of registered storage paths
- Health check storage monitoring (mount point, disk usage alerts)
- Mount-point validation utilities (Linux syscall + cross-platform stubs)
- Controller docker-compose mount changed to /mnt:/mnt:rw for multi-storage
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
admin