admin
3e50902a98
gates / gates (push) Failing after 14s
Both STOPs cleared by the operator. No code changed; documentation only.
STEP 3 (the run's primary deliverable): the full changelog range 4.2.2-1 ->
4.2.5-1 was read (128 lines, all three entries) and swept for
connection-handling vocabulary. Exactly one keyword hit, a false positive
("S3 ... honor the node's proxy settings" = HTTP proxy config for S3, not the
PBS proxy daemon). 4.2.5-1 is a manifest-hardening security release; 4.2.4-1
is S3 rate limits and a locking cache; 4.2.3-1 is UI/LDAP/tape. NOTHING
addresses descriptor lifetime or connection reaping. Recommendation was: do
not upgrade for this reason.
STOP 1: operator ruled to upgrade anyway for rehearsal value. Recorded as a
practice run, not a fix -- and the interpretation was fixed IN WRITING BEFORE
any numbers existed (stop1-ruling.txt): unchanged = expected; changed =
surprise. Neither outcome could then be rationalised into a success.
STOP 2: Hetzner snapshot 421440873, Available. Documented that it covers
/dev/sda ONLY -- /mnt/pbs-datastore is a separate Volume and is NOT in it, so
it is a software rollback and not a backup of the backup data.
UPGRADE: simulated first (0 to remove), then installed 09:51:00->09:51:06Z,
exit 0. Verified: 4.2.5-1 installed, both daemons active, effective open
files still 65536 (the drop-in survived the new package), Recv-Q 0, loopback
200, 200 from BOTH boxes over the tunnel with felhom-pbs active, and the hub
gauge refreshed post-upgrade at 11:59:31.
SLOPE: before +4 fd/1885 s = 183/day; after +5 fd/1919 s = 225/day. NOT
distinguishable -- one descriptor apart, Poisson +/-2 on such counts. The
higher after-figure is noise, not a regression and not an improvement. 30
minutes cannot settle it; R-341 files the +24 h and +7 d checks.
CORRECTIONS to this morning's own report, both published rather than quietly
fixed:
- the "~85/day, ~2 years of runway" figures were WRONG. They came from a
single 17-minute window with a delta of ONE descriptor. Real rate is
183-200/day over two independent windows; runway ~357 days, not 2 years.
- the leak was attributed to CLOSE-WAIT. It is mostly ESTAB: CLOSE-WAIT held
flat at 1 while ESTAB grew 45->49, and at the wedge it was 1011 ESTAB vs
543 CLOSE-WAIT. R-336's fix must target unreaped connections.
- "proxmox-backup-api" reported inactive during verification; that unit does
not exist. Bad query, not a fault, written down because it looked like one.
R-336 stays open: even a fixed leak would not make ~85k requests/day to a
weekly-write DR endpoint correct.
golden-currency still convicts (inherited R-334, controller 0.216.0 vs golden
0.214.0, untouched by this run), so this push is --no-verify per
.claude/rules/gates.md.
129 lines
5.6 KiB
Plaintext
129 lines
5.6 KiB
Plaintext
rust-proxmox-backup (4.2.5-1) trixie; urgency=medium
|
|
|
|
* backup: harden the handling of client supplied backup manifests:
|
|
- only accept archive names that are plain file names carrying a server
|
|
side type extension. A crafted name in a manifest could previously make
|
|
a sync job read or write outside of the snapshot directory, running as
|
|
the unprivileged 'backup' user. Reaching this needed a manifest from a
|
|
configured sync remote or from a client that already had backup access
|
|
to the datastore.
|
|
- keep an uploaded manifest in memory and only persist it on backup
|
|
finish, checking that every archive it lists was really uploaded during
|
|
that session and that the checksums match the ones computed server
|
|
side. A client uploading a manifest that references archives it did not
|
|
upload now gets an error on finish instead of such a snapshot being
|
|
created.
|
|
|
|
* fix #7878: sync: push: reuse the manifest of a previous snapshot on a
|
|
non-encrypting push if the source snapshot was encrypted with a matching
|
|
key, restoring chunk reuse and thus avoiding needlessly long sync runs.
|
|
|
|
* sync: push: keep the sign-only crypt mode of a source archive instead of
|
|
reducing it to unencrypted when pushing without server side encryption.
|
|
|
|
* subscription: reject a subscription key issued for a different
|
|
architecture than the host, as arm64 keys carry an explicit marker, so a
|
|
wrong key fails fast instead of only erroring during the online check.
|
|
|
|
* update to proxmox-upgrade-checks 1.1, which accepts the 7.0 kernel, tells
|
|
a bookworm backport apart from a trixie build and fixes the dkms check.
|
|
|
|
* docs: clarify in the backup protocol description that the manifest is
|
|
uploaded by the client and only persisted on backup finish.
|
|
|
|
-- Proxmox Support Team <support@proxmox.com> Wed, 05 Aug 2026 18:25:37 +0200
|
|
|
|
rust-proxmox-backup (4.2.4-1) trixie; urgency=medium
|
|
|
|
* docs: document the debug symbol repository
|
|
|
|
* datastore: fix wrong local path used for S3 bad chunk handling during
|
|
garbage collection
|
|
|
|
* refactor file creation/mode/ownership helpers to proxmox-product-config
|
|
crate
|
|
|
|
* fix #7642: avoid expensive user lookups on file locking by caching the
|
|
backup user/group ID
|
|
|
|
* depend on proxmox-enterprise-support-keyring, and track its version in the
|
|
package version API endpoint
|
|
|
|
* fix #5748: docs: add `catalog.pcat1` format specification
|
|
|
|
* docs: system requirements: document we recommend local storage
|
|
|
|
* S3: fix #6841: allow configuring request rate limits by updating to
|
|
proxmox-s3-client 1.4.1. these rate limits are split into active and
|
|
passive methods, allowing separate handling of POST/PUT/DELETE and GET/HEAD
|
|
request limits.
|
|
|
|
* S3: config: allow editing the use-node-config flag that controls whether
|
|
requests S3 endpoints honor the node's proxy settings or not
|
|
|
|
* sync: push: gracefully handle previous manifest signature mismatches, which
|
|
can happen when enabling or disabling push-encryption on an already synced
|
|
backup group
|
|
|
|
-- Proxmox Support Team <support@proxmox.com> Wed, 29 Jul 2026 15:08:15 +0200
|
|
|
|
rust-proxmox-backup (4.2.3-1) trixie; urgency=medium
|
|
|
|
* css: remove x-grid-row-loading class, replace it with non-blurry SVG
|
|
variant from proxmox-widget-toolkit
|
|
|
|
* pbs-client: add backoff log throttle, to ensure progress and similar output
|
|
appears quickly initially, but does not create overly long logs
|
|
|
|
* client: report progress during restore
|
|
|
|
* api: journal: adopt proxmox-syslog-api and stream the output, making the
|
|
implementation consistent with the one from Proxmox Datacenter Manager
|
|
|
|
* ui: enable the structured journal view and per-service logs, including
|
|
colored output and filtering capabilities
|
|
|
|
* ui: always use arrays for 'delete' property, instead of manually converting
|
|
|
|
* fix #5971: tape: don't warn on custom MAM attribute write failures
|
|
|
|
* fix #7175: api: time: use timedatectl instead of /etc/timezone
|
|
|
|
* fix #7187: report: add ethtool output for physical interfaces
|
|
|
|
* prune jobs: schedule jobs that do not prune anything, but warn during their
|
|
execution. such jobs allow testing scheduling options, but make no sense
|
|
for production use.
|
|
|
|
* fix #6691: allow search by comment in datastore content, make search
|
|
case-insensitive and correctly reset content view after empty searches
|
|
|
|
* ui: datastore: disable various action tooltips for actions which cannot be
|
|
triggered
|
|
|
|
* ldap: escape the user-provided user name when using it in the LDAP search
|
|
filter that looks up the user DN.
|
|
|
|
* ldap sync: log which user properties change when synchronizing an existing
|
|
user, instead of only reporting that the user was updated.
|
|
|
|
* api schema/section config: add support for declaring deprecated property
|
|
aliases, to allow renaming properties without showing the old name in the
|
|
documentation
|
|
|
|
* rest server: accept deprecated property aliases in JSON request bodies by
|
|
rewriting them to the canonical name before verification and dispatch, like
|
|
the CLI and query-string handling already do.
|
|
|
|
* fix #7690: fs: replace_file: close the temporary file before renaming or
|
|
unlinking it, fixing the replacement on WORM file systems and avoiding
|
|
leftover .fuse_hidden files on FUSE mounts.
|
|
|
|
* fs: make_tmp_file: append the temporary suffix instead of replacing the
|
|
file extension, keeping the original file name intact for easier
|
|
debugging of leftover temporary files.
|
|
|
|
-- Proxmox Support Team <support@proxmox.com> Tue, 14 Jul 2026 12:54:15 +0200
|
|
|
|
rust-proxmox-backup (4.2.2-1) trixie; urgency=medium
|