R-182 CLOSED (controller v0.194.0 + hub v0.90.0/.1), proven live on demo-hp. The hub's notification_log for the run reads: two per-app failures RECORDED, one digest SENT naming both, and the customer channel SKIPPED with operator_only. Against the measured previous behaviour — two failures, one email naming one app, one leaving no trace anywhere. Scenario D proved itself on an event I had not planned: disk_critical alarmed on two filesystems, the second was collapsed by the cooldown, and that collapse is now visible WITH ITS KEY. Yesterday it would have left nothing at all. A gap the spec did not anticipate is recorded with its fix: the per-app event also fires from the periodic sweep, outside any run, so making it record-only would have created a NEW silence. The sweep emits a digest too, with no run_id, so it stays under the ordinary hourly cooldown. ep0: MEASURED on the box — 7757 MB (8 GB), 4 vCPU, and the 4 GiB swapfile SURVIVED the resize and is active (checked, because a resize is a stop/start). The 40 GB local disk is UNCHANGED, so no disk figure was touched anywhere. Five documents corrected — three of which the task's list did not name, found by searching. Two audit/evidence documents ANNOTATED, body untouched: they record what was true when written and that is their value. R-90 CLOSED. R-86 unblocked and re-ranked, stated honestly: 8 GB is comfortable, not unbounded — the original OOM was a 14.46 GB restore — so the restore-test cadence should still be paced, just not by fear of the endpoint. target-selection.md's "D-d did not name ep0 either way" is deliberately left standing. It is the operator's question, not CC's. STATUS.md 127 -> 83 lines, items rather than sentences.
9.7 KiB
Campaign 10 — Phase A journal (2026-07-31)
All times CEST unless marked Z.
Venue
| Host | demo-hp (HP t740), Tier 0, the designated drill/build host |
| VM | 311 c10-appliance — q35 / OVMF (pre-enrolled-keys=0), 4 cores, 8 GB, cpu=host |
| Disks | scsi0 200 G (system) · scsi1 50 G · scsi2 50 G — all qcow2 on c10-scratch |
| Storage | c10-scratch, dir at /mnt/nvme-1tb — the mount ROOT, content=images. Root chosen deliberately: a storage at a subdirectory sets exactMount=false → reachable=false → StorageStateDisconnected (felhom-agent/internal/storage/observe.go:336), which would emit storage_disconnected for demo-hp for the whole run — the exact signal I1/I2 test. Coexists with felhom-backup on the same path; that storage was not modified. |
| Guest network | demo-hp's vmbr0 is 192.168.0.87/24, a different physical LAN from DooPlex's own 192.168.0.0/24. Reached via ssh -J demo-hp. |
| Console | no browser on DooPlex → qm monitor screendump → PPM → PNG, read visually; keystrokes via sendkey |
| Untouched | drill-r50 (VM 300), guest 9201 on both demo boxes, local-lvm, both backup targets |
Baselines — every value read fresh at the start of this run
| What | Value | How read |
|---|---|---|
controller main |
v0.188.0 | CHANGELOG.md top; HEAD=origin/main=4115e88, tree clean |
| golden's baked controller | 0.188.0 (sha 7353d8be…) |
hub /configuration, selected option |
| agent published + vouched | 0.119.0 (sha e37aca82…) |
hub /configuration, selected option |
| agent on both demo boxes | 0.119.0 | felhom-agent --version |
agent main |
v0.119.0 | felhom-agent/CHANGELOG.md |
| hub | 0.86.0 | live deploy/hub image tag == hub/CHANGELOG.md top |
| ISO | 1.26.1, sha256 f3cc86d5…, 1 705 322 496 B |
live round trip from https://iso.felhom.eu/ |
felhom.eu HEAD |
e9a74a0, clean |
git rev-parse |
| managed floor | v0.156.0 (DB override); env fallback v0.120.0 | hub /configuration |
Golden vs main: NOT behind — both 0.188.0. The deliberate decision the brief asks for is therefore
vacuous this run: the campaign tests what is shipping and what is current, with no divergence.
Two brief assumptions were stale and were corrected by reading fresh:
- The brief was written against ISO v1.25.0;
iso.felhom.eubegan serving 1.26.1 at 18:37 Z the same day — ~90 minutes before this run started. - The brief (and
CLAUDE.md,target-selection.md:41-42) say demo-hp has no baked SSH key.ssh -o BatchMode=yes demo-hpauthenticated by key, first try. Already filed as R-129 by the 2026-07-31 tester-gate run — not re-filed (register grep per the fences).
A1 — build the appliance from the published ISO
1.26.1 is a PUBLIC RELEASE image and cannot auto-install. Verified against the ISO bytes on demo-hp, not inferred from the manifest:
| Probe | Hits |
|---|---|
auto-installer-mode.toml |
0 |
answer.toml |
0 |
proxmox-auto-install |
0 |
felhom-bootstrap_1.26.1_all.deb |
1 |
| Felhom grub menuentries | exactly 2, both interactive |
Manifest agrees: mode: release … NO answer.toml, NO baked credential, interactive disk selection,
root-password: NONE — the installer prompts, loader: shim (stock MS-signed chain).
Driven blind through the Terminal UI entry (the graphical entry is not drivable — the QEMU monitor's
mouse events do not move the guest cursor, per REPORT-iso-release.md). Screendump before every
keystroke.
Traps hit and handled, each verified rather than assumed:
- GRUB default is the graphical entry. The first attempt auto-booted it because the
downkeystroke landed after the 15 s countdown expired. Reset, and sentdowninside the window in one round trip. - Guest keymap was Hungarian, but
sendkeyemits US scancodes — every symbol afterwards (notably@, which is AltGr+V on a Hungarian layout) would have been silently mangled, including the root password, locking the box out. Switched to U.S. English before typing anything. Confirmed positively:c10@felhom.eurendered with a correct@and.. - Disk-selection safety: only
scsi0was attached during the install, so the installer offered exactly one target (/dev/sda, 200 GiB) and could not reach a data drive. The two 50 G data drives were attached afterwards. - Boot-order trap (
REPORT-iso-release.md, recorded twice there):--bootwas set in its ownqm setafter the disks existed, and verified fromqm config(boot: order=ide2;scsi0). After the install, the order was flipped toorder=scsi0— again verified fromqm config, not from the screen.
Real completion signal (not "an artifact changed"): 4.2 GB actually written to
vm-311-disk-1.qcow2, the installed system booted on its own, and the console showed the PVE banner at
https://192.168.0.105:8006/.
Positive observables — all three present:
| Observable | Evidence |
|---|---|
| package delivered | ii felhom-bootstrap 1.26.1 all on the box |
| unit fired at first boot | systemctl is-enabled felhom-bootstrap = enabled; is-active = activating |
| registers as an unclaimed appliance | hub /hosts: uuid 55ab3776-… (matches VM smbios), pairing code FD6-A6S, MAC bc:24:11:46:25:fe, 3 SSH host keys, hardware read |
A1 — PASS.
A2 — claim
Customer created: c10-soak — "Campaign 10 two-storage soak (SCRATCH - delete at teardown)",
domain c10.felhom.eu, email nagyfenyvesi.viktor@gmail.com. Deliberately not drill-r50,
sess-*, or any existing record.
Appliance 19 bound to it. Hub log, verbatim:
22:50:03 appliance 19 BOUND to customer c10-soak (mode=appliance) — delivery staged for its next poll
22:50:12 appliance credentials DELIVERED once to appliance 19 (passphrase withheld)
22:50:19 [claim] claim code (gen 1) emailed to the registered address of c10-soak
22:50:49 host enrolled: c10-soak-8a405e (customer c10-soak)
22:50:49 vaulted break-glass recovery credential for host c10-soak-8a405e (user=root@pam, secret 32 chars)
22:50:51 Artifact manifest served for customer c10-soak (agent=0.119.0 golden=0.188.0)
22:51:13 wg registered: host=c10-soak-8a405e ip=10.77.0.6/32 gen=1 sync=ok
22:51:14 host-report from c10-soak-8a405e (0 guests, 2 storage targets, ...)
22:51:14 DR-recipe host-half stored for customer c10-soak (host c10-soak-8a405e, v1)
The installer's root password stops working at 22:50:49 — day-0 replaces it with a hub-vaulted
managed credential (G1 host_recovery). Retrieved via POST /hosts/c10-soak-8a405e/reveal-recovery-credential
→ root@pam, 32 chars, stored file→file at ~/.config/campaign10/host-recovery.json (0600), never printed.
Box state after day-0:
felhom-agent 0.119.0 (== published+vouched)
/etc/felhom-controller-image : …/felhom-controller:0.188.0 (== golden == main)
guest 9201 c10-soak running
docker: controller 0.188.0 (healthy), traefik v3.6.7, filebrowser 1.3.3-stable (healthy)
block devices: sda 200G, sdb 50G, sdc 50G
Claim gate, the positive discriminator, read over the path the UI uses (traefik on 443, Host: header
mandatory — the controller does not listen on 8080; 80 is a 301 to HTTPS):
GET https://127.0.0.1/api/apps Host: felhom.c10.felhom.eu
→ {"ok":false,"error":"dashboard not yet claimed"}
A2 — BLOCKED on the emailed claim code (R-119, confirmed live again). The code exists only in the customer's mailbox; there is no operator-side route.
Scope constraint found in Phase A — Tier 3 cannot be isolated, so it will not run
The brief's §2 requires the campaign's PBS to be a dedicated datastore and namespace on DooPlex. That is not reachable, for two reasons that are each already-recorded deliberate positions, not new defects:
- Offsite hard-requires the DR tier.
hub/internal/web/configs.go:1300refuses offsite without it: "Offsite backup requires the DR tier — enable it first (the escrow ceremony depends on the PBS key)". Closed by policy 2026-07-12 (drill F-6, DR-tier-by-default decisions 3/4). - The DR tier only ever provisions on ep0. Peer allocation and endpoint sync use the lowest
endpoint_idonly; per-endpoint allocation is an explicitly deferred arc (hub/README.md:260).
So the only two configurations are: DR tier on → the campaign's PBS traffic lands on ep0, which is Tier 2, the offsite of last resort, RAM-constrained (3.8 GB, R-90 — note added 2026-08-03: ep0 has since been rescaled to a CX33 with 8 GB RAM; this journal records what was true when it was written and is deliberately not revised) and fenced by §3 — or DR tier off → no Tier 3 at all. Chosen: DR tier OFF, offsite OFF, which is the only option §3 permits.
Consequence, stated plainly rather than discovered later: the campaign touches neither ep0 nor the Storage Box at any point — a stronger isolation than the brief asked for, obtained by not running the tier. What is lost: all Tier-3 operations in B1, I8 entirely, and the Tier-3 rows of the RTO/RPO table. Everything else — the two-drive core (R-112/R-113/R-114/R-116/R-117), D5, I1–I7 and I9–I11 — is unaffected, because those live on the drives and the local/whole-guest tiers.
No R-n minted: per the fences, the register was grepped first and both halves are already recorded
(F-6 policy close; the hub/README.md:260 deferral). This is a campaign constraint, not a finding.
Isolation gate — §2
See ../isolation/pbs-denial.txt and ../isolation/restic-denial.txt. Summary in the main audit.