# Fleet node inventory — the physical demo/lab hosts > Added 2026-07-21, when the fleet stopped being one box. Two Proxmox hosts now check in to the hub. > This is the operator-facing inventory: what the hardware is, how to reach it, and what is > deliberately NOT enrolled on it. ## The fleet | | `demo-felhom-8363b5` | `demo-hp-bb76ea` | |---|---|---| | Hardware | N100 mini-PC | **HP t740 Thin Client** (s/n `8CN944035T`) | | CPU / RAM | Intel N100 | **AMD Ryzen Embedded V1756B**, 8 threads / **30 GiB** | | Firmware | AMI AN3PLUS-class | **AMI M42 v01.10 (11/11/2020)** | | PVE node name | `demo-felhom` | `felhom-host` | | Customer | `demo-felhom` | `demo-hp` | | Agent / controller | *not recorded here* — see the note below | *not recorded here* | | Control plane | **island** `169.254.253.1:8443` on `vmbr9` (R-50, migrated 2026-07-25) | **island** `169.254.253.1:8443` on `vmbr9` (R-50, migrated 2026-07-25) | | SSH alias | `felhom-pve` | **`demo-hp`** | | Tailnet | `100.70.170.35` | **`100.76.96.79`** | | Loader used to install | `mkimage` (unsigned, SB **off** — firmware workaround) | **`shim`, Secure Boot ENABLED** | > **No component versions are recorded on this page — deliberately.** Agent, controller, hub and > host-install versions change several times a day, so any number written here is wrong within hours and > is then read as fact. **Ask the fleet instead:** the hub host list (`/hosts`) and customer list > (`/configs`) carry the live agent and controller versions per box; `felhom-agent --version` on the > node and `pct exec -- docker ps` in the guest are the authorities. Versions that must be pinned > in writing belong in the per-repo `CHANGELOG.md` and the hub's Day-0 artifact manifest — not in an > inventory. **The fleet is not uniform**: on 2026-07-30 the two boxes ran different agent *and* > different controller versions, so a single number for "the fleet" would have been wrong regardless. **Both are at the VACATION site** and travel home with the rest of the kit **~2026-08-02**. While away, their LAN addresses are on that site's `192.168.0.0/24`: N100 `.147`/`.162`, HP `.87` — **re-check rather than trusting these** (`ip -br addr show vmbr0`; the N100 read `.162` on 2026-07-30). The tailnet addresses are the stable ones — use those. Direct LAN literals are **not** reachable from DooPlex while the boxes are away (`felhom-pve-lan` → `No route to host`, 2026-07-30). **Which box is safe to break, and what may be done to each: [`../runbooks/target-selection.md`](../runbooks/target-selection.md).** This page is *what the hardware is*; that page is *what you may do to it*. ## demo-hp — the HP t740, in detail ### Disks | device | model | serial | role | |---|---|---|---| | `sda` | SanDisk X600 M.2 2280 SATA 128GB | `182195804614` | **system disk** — PVE, LVM (`pve-root` 39.6G, `pve-data` thin pool, guest 9201's three volumes) | | `nvme0n1` | KXG50PNV1T02 NVMe TOSHIBA 1024GB | `58BS11AFT8MQ` | **ENROLLED** — mounted `/mnt/nvme-1tb`, the enrolled user-data drive **and** the `felhom-backup` whole-guest backup target | > **The NVMe joined the product on 2026-07-22, through the normal Tárhely flow, as intended.** Enrolled > to guest 9201 (PUBLISH TRAIN, `pilot/RUNBOOK-publish-agent-0.93-2026-07-22.md`); the vzdump target was > moved onto it by E-2a. Verified live 2026-07-30: `nvme0n1` → `/mnt/nvme-1tb`, and > `dir: felhom-backup / path /mnt/nvme-1tb / is_mountpoint 1` in `storage.cfg`. > > **The "PRESENT AND UNENROLLED — do not touch" fence that stood here is RETRACTED**, and its reason is > recorded so it is not mistaken for a live rule: the NVMe was outside everything because the install > ISO's exact-serial filter pinned `sda` only, and it was to join *through the Tárhely flow rather than > the installer or by hand*. **That condition was satisfied; the prohibition expired with it.** It stood > for eight days after enrolment and contradicted the task specs that (correctly) sent drill-VM disks to > `/mnt/nvme-1tb`. > > Still true, and now the operative caution: a dir storage there **must sit at the mountpoint root** (a > subdirectory fails the agent's `exactMount` check → the storage reads `disconnected` forever), and it > shares the device with the box's own backups — so remove scratch storages when done. ### NIC map — and the trap This board has **five wired interfaces**, and the obvious one is the wrong one: | interface | MAC | driver | what it is | state at this site | |---|---|---|---|---| | `enp1s0f0` | `a0:36:9f:5d:07:20` | `igb` | 4-port expansion card | no carrier, **no DHCP** | | `enp1s0f1` | `a0:36:9f:5d:07:21` | `igb` | ″ | no carrier | | `enp1s0f2` | `a0:36:9f:5d:07:22` | `igb` | ″ | no carrier | | `enp1s0f3` | `a0:36:9f:5d:07:23` | `igb` | ″ | no carrier | | **`enp2s0f0`** | `7c:d3:0a:77:d9:76` | `r8169` | **onboard port — the one that works** | carrier up, 1000 Mb, **this is `vmbr0`'s port** | | `wlo1` | `24:ee:9a:e5:05:b0` | `iwlwifi` | wifi | unused | **This trap cost the first install.** The 4-port card got no lease, and instead of aborting the installer baked its `192.168.100.2` fallback as a **static** `vmbr0` address and completed — a box that looked installed and could never call home. Repaired on the console by bridging `vmbr0` to `enp2s0f0`. Filed as **R-59** (must hard-abort) and **R-60** (first-boot NIC sweep self-heal). Current, post-repair: `vmbr0` static `192.168.0.87/24`, gw `192.168.0.1`, bridge-port `enp2s0f0`. No trace of `192.168.100.2` remains. `wg-felhom` `10.77.0.3/32` up to the hub. Guest **9201 `demo-hp`** running. Agent config shape (R-50 island): `local_api` on `169.254.253.1:8443`/`vmbr9`, guest `eth1 169.254.253.2/30`, `lan_resolver.host_ip` pinned to `192.168.0.87`. ### Designated drill + build VM host (operator ruling, 2026-07-25) **Ruling:** drill and build VMs are hosted on the **t740 from now on** — NOT on felhom-pve, and moving them off DooPlex (the production k3s node). **This is a VM-HOSTING ruling only; the build-PIPELINE relocation to the t740 is NOT ruled or implemented here.** **Current state (updated 2026-07-25 PM):** the ruling is **realized** — the t740 now hosts the first drill appliance. **QEMU VM `300` = `drill-r50`**, a nested PVE-in-a-VM (8 GiB RAM, 4 vCPU cpu=host, 32 GiB local-lvm disk, OVMF/SB-off, one NIC on `vmbr0` DHCP). Installed from `felhom-pve-9.2-1-v1.25.0-nested-vm-generic-mkimage.iso` through the **real day-0** (self-register → operator bind to scratch customer `drill-r50` → deliver → nested guest **9201** provisioned and healthy on the then-current controller + agent). Its own break-glass root is vaulted in the hub `host_recovery/drill-r50-0a4f9a`; reach it as `root@192.168.0.176` **through `demo-hp`** (it has no key and no tailnet — it is a peer on demo-hp's LAN). It has snapshot **`r50pre`** (clean LAN-literal day-0). This VM was provisioned to unblock and run the **R-50 island-bridge empirical spike** (`audits/SPIKE-island-bridge-2026-07-25.md`) — **probes P1–P8 PASSED 2026-07-25, verdict GO**; the drill was left in its working island configuration. It is a throwaway: destroy with `qm stop 300 && qm destroy 300 --purge 1` (and delete the `drill-r50` customer + appliance #9 hub-side) when no longer needed. The historical golden-bake `drill.qcow2` still lives on **DooPlex** (`/mnt/5_hdd/felhom.eu/drill/`, ~18G, powered off) and is unrelated. The build-PIPELINE relocation to the t740 remains unbuilt. ### Access — there is no baked SSH key `ssh demo-hp` resolves to the tailnet address, but **no operator public key is on this box** — the HP profile deliberately left `FELHOM_ROOT_SSH_KEY` blank. Authentication is the **G1 break-glass root password vaulted in the hub**, `host_recovery` row `demo-hp-bb76ea` (set at day-0, 2026-07-21 16:24 UTC). Retrieval (operator-side, and **shred the copy** — that DB holds every host's secret): ```bash sudo kubectl -n felhom-system exec -- cat /data/hub.db > /tmp/x.db python3 -c "import sqlite3;print(sqlite3.connect('/tmp/x.db').execute( \"SELECT secret FROM host_recovery WHERE host_id='demo-hp-bb76ea'\").fetchone()[0])" shred -u /tmp/x.db ``` Then `sshpass -e ssh root@demo-hp` (sshpass is on DooPlex, not on the nodes). **This is the lockout filed as R-61**: the ISO mints a throwaway root password per build and discards the plaintext, so the console is unreachable without a working hub and network — precisely what you may be trying to fix. Slice 1 is to emit the baked password into the build report. `demo-hp-lan` (`192.168.0.87` via `ProxyJump felhom-pve`) is the fallback while the box is away. ## OOB belt (H1) — both boxes, since 2026-07-23 (ISO train v1.25.0) The dedicated OOB sshd belt (TASK H1: `felhom-sshd` + the static `inet felhom_oob` table + `felhom-op`) is installed and **active on BOTH fleet boxes** — the F9 gap (belt on neither) is closed. From v1.25.0 host-install installs it by default on every appliance install (`--no-oob` opts out; byo still refuses). - **Claimed port: `8822` on both** (first-free from `[8822,2222,8022,62222]`; persisted per box). - **Reachability: the wg-felhom offsite tunnel ONLY** — the belt admits the operator `/32` (`10.77.0.250`) over `wg-felhom` to 8822 and drops everything else; `:22` and every other interface are untouched. **tailscale does NOT reach the belt** (wrong fabric, dropped by design). - **Operator login** (from the machine holding the wg-felhom operator tunnel + the registered `oob_operator_ssh_pubkey`): `ssh -p 8822 felhom-op@10.77.0.2` (felhom-pve) / `@10.77.0.3` (demo-hp). **PROVEN live 2026-07-23** on felhom-pve (`felhom-op@demo-felhom`). - **Operator tunnel**: the Mac/Windows operator peer dials `ep0.felhom.eu:443` (WireGuard), address `10.77.0.250/32`, AllowedIPs `10.77.0.0/24`, server pubkey `f3d1ZI7…`. ep0's `forward` chain (persisted in its `/etc/nftables.conf`) allows `10.77.0.250 → 10.77.0.2/.3`. If a work-network blocks UDP/443, the RheinMetall-style firewalls pass UDP/51820 — a home/hotspot network works on 443. - Register/rotate the operator identity hub-side: `PUT /api/v1/admin/wg/operator-peer` (global key) with `{pubkey, assigned_ip:"10.77.0.250", ssh_pubkey}`; wgsync pushes it to ep0 and the SSH key flows to both boxes' `felhom-op` authorized_keys within a tick. ## felhom-pve (the N100) — vault parity + access felhom-pve has **operator SSH-key access** (over tailscale `100.70.170.35`) AND, since 2026-07-23, **G1 break-glass vault parity with demo-hp**: its root@pam password is freshly rotated and vaulted in the hub `host_recovery` row **`demo-felhom-8363b5`** (same PUT `…/recovery-credential` mechanism day-0 uses; verified retrievable + authenticating over `:22`). Retrieval + shred-the-copy recipe is identical to demo-hp's below (swap the host_id). So a lost N100 key is recoverable the same way as the key-less HP. ## Tailscale on demo-hp is an OPERATOR-LAB EXCEPTION > **Read this before any product-shape audit.** `demo-hp` is **customer-shaped** — it is a normal > appliance install with a real customer record (`demo-hp`), a real guest, and a real day-0. > **Tailscale is not part of that shape.** It was installed by hand on 2026-07-21 purely so the > operator can reach a lab box that lives on someone else's LAN. > > **Real customer boxes never get tailscale.** Their operator access is the WireGuard tunnel plus > the H1 OOB path, and nothing else. If a future audit finds tailscale on `demo-hp` and concludes > the product ships it — that conclusion is wrong, and this paragraph is the reason. The same > exception already applies to `felhom-pve`. Details, and the two hard rules that apply to any host node, in `operations/tailscale.md`. ## What is NOT enrolled here (deliberately) - **No PBS datastore, no offsite target** on demo-hp; the DR tier is the N100's. - **No second customer guest** beyond 9201. *(The 1TB NVMe was on this list until 2026-07-22. It is enrolled — see the disks table above.)*