Power-cut fixes E done: a real cut mid-backup on demo-hp, the box cleared up by itself; agent 0.156.1 on all three boxes; R-1006 + R-1008 closed, R-1013 filed

demo-hp 12:06:52 UTC, 1.53 GB written: at boot the dead task was judged dead, the partial and its .tmp
removed by the root helper, the next backup finished (5.65 GB), host root back below its pre-cut use.
Orphan thin device 4 repaired first (operator B2 - A); R-1012 P2 -> P3, detection stays open.
Delivered by signed jobs to Tester 1 and the N100 (probe 71/71, real sudo checked). Controller 0.310.0
everywhere after the operator cleared the per-customer floors. Register 134 -> 134 (opened 4, closed 4).
Report: REPORT-power-cut-fixes-2026-10-14.md. Both plugs ON.

Claude-Session: https://claude.ai/code/session_012qRErfCoiTkvDK9N5XHbzb

STATUS.md

@@ -2,11 +2,11 @@
 
 **Ready for the first real tester (Tester-2): yes. Tester 2 (a laptop) is off; nothing was sent to it.**
 
-**Updated 2026-10-14 (night).** Agent 0.155.0 on all three boxes; controller 0.310.0 on demo-felhom, 0.309.0 on the
-other two until the floor is raised. Open items: see `documentation/backlog/OPEN-ITEMS.md`. Older notes, day by day:
-`documentation/backlog/STATUS-HISTORY.md`. Reports: `REPORT-night-power-2026-10-13.md`, `REPORT-poweroff.md`.
+**Updated 2026-10-14 (day).** Agent 0.156.1 + its bundle and controller 0.310.0 on all three boxes; golden 0.310.0. Open items: see `documentation/backlog/OPEN-ITEMS.md`. Older notes, day by day:
+`documentation/backlog/STATUS-HISTORY.md`. Reports: `REPORT-power-cut-fixes-2026-10-14.md`, `REPORT-night-power-2026-10-13.md`, `REPORT-poweroff.md`.
 
 ## What works
+- A power cut in the middle of a backup no longer blocks later backups: the box removes the half-written backup at start-up (proven with a real cut on demo-hp, on all three boxes now).
 - A household can switch the machine off; the hub holds alarms for 14 days and clears the state by itself (N100).
 - A real power cut on demo-hp: it started by itself after all 8 cuts of the night (with the BIOS set), every app back in ~4 min; stale and recovered mails true and paired.
 - The machine estimator is public (/gepigeny, /en/sizing); sizing measured for 61 apps on the N100.
@@ -18,11 +18,10 @@ other two until the floor is raised. Open items: see `documentation/backlog/OPEN
 - DooPlex: a failed disk with its alarms silenced (R-934); CI jobs still get lost (R-887); something sets the shared
   checkout to „bare" (R-935); a Longhorn volume at 91 %.
 - Tester 2 has never made an off-site check (R-862). The scratch box cannot read the drill catalog (R-992).
-- After a power cut: the half-backup that blocked every later backup (R-1006) is fixed in agent 0.156.1 — waits on your vouch; Immich keeps photos with empty previews or no original until its own repair job runs (R-1007, your decision).
+- After a power cut: Immich keeps photos with empty previews or no original until its own repair job runs (R-1007, your decision).
 
 ## What we work on
-- Agent 0.156.1 (the power-cut clean-up) and the power-off button reach the boxes when you vouch and raise the floor (below); then CC proves the clean-up with one more cut on demo-hp.
-- The power-cut findings (R-1004 to R-1008) and the estimator figures (R-1009, your choice).
+- The power-cut findings still open (R-1004, R-1005, R-1007, R-1010, R-1012, R-1013) and the estimator figures (R-1009, your choice).
 
 ## Waiting on you — decide
 
@@ -40,8 +39,6 @@ other two until the floor is raised. Open items: see `documentation/backlog/OPEN
 | D10 | R-1009 | The „raise only" estimator update changes ONE verdict: 5 apps without Immich on 8 GB, fits well → tight (0.5 MB over). Publish anyway (A), round down first (B), or keep today's figures (C)? | **A** — the page stays truthful, one line reads stricter | B: one rule sentence, may still flip; C: nothing | the page keeps today's figures; Immich, Jellyfin, Home Assistant, Paperless read low | — |
 
 ## Waiting on you — do
-- **Vouch agent 0.156.1** + its bundle (NOT 0.156.0 — superseded; 0.156.1 includes 0.155.0); **raise the floor** to controller 0.310.0 with `min_agent` 0.155.0. If not: only the N100 has the power-off button, a fresh install gets 0.154.0, and a power cut mid-backup still blocks every later backup.
-- **Golden bake** at the weekly slot (R-468). If not: the waiver ends 2026-10-20 and pushes stop at the gate.
 - **N100 BIOS:** read „After Power Loss" (the HP's „Previous State" made it start after 8 of 8 cuts). **HP BIOS:** „Bypass F1 Prompt on Configuration Changes" → Enable.
 - **Pull the failed disk** Z6A07P2G (R-934; the twin Z6A070XZ is `/mnt/3_hdd`). If not: its alarms return on 11 November.
 - **Hub master key** into the password manager, then `shred -u` the key file (security review 2026-10-12, in the history).