CONTEXT + 08: tonight's rulings (D22, D26) and the CC-unattended R-1199 decision (the box's page is the list the hub mails by); evidence: rc.2 smoke on 9202, 9202 back as found, no-swap test tools
This commit is contained in:
@@ -499,6 +499,13 @@ app-mail settings).*
|
||||
**Pick: A.** It follows the direction (the household decides three things, not 18), keeps every existing
|
||||
mechanism, and each slice is reversible on its own. B can be added later as a fourth choice if households ask.
|
||||
|
||||
**`[DESIGN]` 2026-10-21 night — the box's page is the list the hub mails by (R-1199; decided by CC unattended — operator
|
||||
may reverse).** Measured: a fresh box shows its default list ticked, but pushed nothing until the household saved the
|
||||
page, so the hub kept mailing by an older stored list (Tester4: saved 2026-10-18, without disk warning, drive
|
||||
disconnected and second-drive failure — 1 household alarm of 9 on the rehearsal day). Now a box whose household never
|
||||
saved a choice pushes the default list at start (no address — the hub keeps the stored one); a saved choice is pushed
|
||||
only as before (R-922). Controller `ba22f9b`, unreleased.
|
||||
|
||||
**What the operator still gets:** everything, unchanged — the operator channel never reads the household's switches
|
||||
(`processOperator` is independent of `enabled_events`).
|
||||
|
||||
|
||||
@@ -0,0 +1,4 @@
|
||||
['id', 'host_id', 'customer_id', 'received_at', 'report_json', 'agent_version', 'cpu_percent', 'memory_percent', 'disk_percent', 'guest_total', 'guest_running', 'cloudflared_status']
|
||||
2026-10-21 21:06:44 agent 0.162.0-night.2 host_swap_mb 7935 guest_swap_mb 4096 guest spec swap [(9201, 4294967296)] oob present True
|
||||
2026-10-21 20:51:35 agent 0.162.0-night.2 host_swap_mb 7935 guest_swap_mb 4096 guest spec swap [(9201, 4294967296)] oob present True
|
||||
2026-10-21 20:36:29 agent 0.162.0-night.1 host_swap_mb None guest_swap_mb None guest spec swap [(9201, None)] oob present True
|
||||
@@ -0,0 +1,5 @@
|
||||
21:09:00Z stop 200
|
||||
remove 200 {"ok": true, "data": {"removed": "rallly", "volumes_removed": ["rallly_rallly_postgres_data"], "hdd_paths_removed": [], "hdd_paths_preserved": [], "hdd_note": "Az alkalmazás nem tárolt saját adatot külső meghajtón, így ott nem volt mit törölni.", "userdata_kept": [], "backup_paths_removed": ["/mnt/s
|
||||
0
|
||||
0
|
||||
0
|
||||
@@ -0,0 +1,5 @@
|
||||
--- FAIL: TestR1199_ANeverSavedChoiceIsPushedAtStart (0.00s)
|
||||
prefs_sync_wiring_test.go:15: a box with no saved choice must push the default list its page shows
|
||||
FAIL
|
||||
FAIL gitea.dooplex.hu/admin/felhom-controller/cmd/controller 0.014s
|
||||
FAIL
|
||||
@@ -0,0 +1,24 @@
|
||||
gitea.dooplex.hu/admin/felhom-controller:0.338.0-rc.2
|
||||
gitea.dooplex.hu/admin/felhom-controller:0.338.0-rc.2 Up 30 seconds (healthy)
|
||||
/ 302
|
||||
/launcher 200
|
||||
/stacks 200
|
||||
/apps/immich 200
|
||||
/apps/immich/guide 200
|
||||
/backups 200
|
||||
/backups/restore 200
|
||||
/backups/remote 200
|
||||
/backups/escrow 404
|
||||
/storage 200
|
||||
/storage/init 200
|
||||
/sharing 200
|
||||
/settings/security 200
|
||||
/settings/notifications 200
|
||||
/deploy/rallly 404
|
||||
/apps/rallly 200
|
||||
/monitoring 200
|
||||
/kept-data 200
|
||||
error-or-panic lines since start: 0
|
||||
storage/init: Hagyd igy: True | prefilled hdd_ value: ['hdd_1'] | novalidate: True
|
||||
family hint accents: True
|
||||
remote: Haladó: True | restic + SFTP shown: False
|
||||
@@ -0,0 +1,11 @@
|
||||
gitea.dooplex.hu/admin/felhom-controller:0.337.0
|
||||
felhom-controller gitea.dooplex.hu/admin/felhom-controller:0.337.0 Up 30 seconds (healthy)
|
||||
filebrowser gtstef/filebrowser:1.5.6-stable Up 8 hours (healthy)
|
||||
immich-machine-learning ghcr.io/immich-app/immich-machine-learning:v3.2.4 Up 2 hours (healthy)
|
||||
immich-postgres ghcr.io/immich-app/postgres:16-vectorchord0.4.3-pgvectors0.2.0 Up 2 hours (healthy)
|
||||
immich-redis redis:7-alpine Up 2 hours (healthy)
|
||||
immich-server ghcr.io/immich-app/immich-server:v3.2.4 Up 2 hours (healthy)
|
||||
paperless-postgres postgres:18-alpine Up 2 hours (healthy)
|
||||
paperless-redis redis:7-alpine Up 2 hours (healthy)
|
||||
paperless-webserver ghcr.io/paperless-ngx/paperless-ngx:2.20.15 Up 2 hours (healthy)
|
||||
traefik traefik:v3.7.13 Up 19 hours
|
||||
+29
@@ -0,0 +1,29 @@
|
||||
#!/bin/bash
|
||||
# noswap.sh MINUTES — night 2026-10-21 Part 2.1: does the freeze come back on a host with NO swap? On the soak VM
|
||||
# (host 192.168.0.128, NOT demo-hp): record → `swapoff -a` → the same upload burst (load2.py cycles on the helper CT 9332,
|
||||
# via noswaprun.sh) for MINUTES → `swapon -a` → record. The 10 s recorder and the outside probe keep running.
|
||||
# Run from DooPlex. Prints a timeline; nothing secret.
|
||||
set -u
|
||||
M=${1:-30}
|
||||
SP=/tmp/claude-1000/-mnt-5-hdd-felhom-eu-git/38fde0c6-e964-4ec1-b0c7-56e62d675225/scratchpad
|
||||
BX=$SP/bx
|
||||
F='perl:\|LC_\|LANG\|supported\|locale\|Falling'
|
||||
t() { date -u +%T; }
|
||||
echo "$(t) NOSWAP START ($M min)"
|
||||
$BX 'export LC_ALL=C; echo "## before"; swapon --show; free -m; pct config 9201 | grep -E "^(memory|swap)"; cat /sys/fs/cgroup/lxc/9201/memory.swap.max' 2>&1 | grep -v "$F"
|
||||
echo "$(t) swapoff -a"
|
||||
$BX 'export LC_ALL=C; time swapoff -a; swapon --show; free -m | grep -i swap' 2>&1 | grep -v "$F"
|
||||
echo "$(t) restarting immich-machine-learning so its models load again under the burst (as on the first afternoon)"
|
||||
$BX 'pct exec 9201 -- docker restart immich-machine-learning' 2>&1 | tail -1
|
||||
echo "$(t) burst start"
|
||||
sec run REHEARSAL_2026_10_20_IRISZ_PW,REHEARSAL_2026_10_20_ODON_PW -- sh -c 'printf "IRISZ=%s\nODON=%s\n" "$REHEARSAL_2026_10_20_IRISZ_PW" "$REHEARSAL_2026_10_20_ODON_PW" | ssh hp "pct exec 9332 -- bash -c \"umask 077; cat > /root/.burstenv\""'
|
||||
ssh hp "pct exec 9332 -- bash /root/noswaprun.sh $M" &
|
||||
BP=$!
|
||||
end=$(( $(date +%s) + M*60 ))
|
||||
while [ "$(date +%s)" -lt "$end" ]; do sleep 60; echo "$(t) health $(tail -1 $SP/soaklive/02-outside.txt | awk '{print $2, $3}')"; done
|
||||
echo "$(t) burst window over; swapon -a"
|
||||
$BX 'export LC_ALL=C; swapon -a; swapon --show; free -m | grep -i swap' 2>&1 | grep -v "$F"
|
||||
wait $BP 2>/dev/null
|
||||
echo "$(t) agent log (host-swap):"
|
||||
$BX 'journalctl -u felhom-agent --since "-60min" --no-pager | grep -E "host-swap" | cut -c1-260' 2>&1 | grep -v "$F"
|
||||
echo "$(t) NOSWAP END"
|
||||
@@ -0,0 +1,8 @@
|
||||
#!/bin/bash
|
||||
# noswaprun.sh MINUTES — on the helper CT: the no-swap burst (load2.py cycles). The env file is read into memory and
|
||||
# shredded at once (as soakrun.sh).
|
||||
cd /root
|
||||
ENVD=$(cat /root/.burstenv); shred -u /root/.burstenv
|
||||
echo "$(date -u +%T) BURST START $1 min" >> /root/noswap.log
|
||||
timeout $(( $1*60 + 300 )) python3 /root/load2.py $1 <<< "$ENVD" > /root/noswap-burst.log 2>&1
|
||||
echo "$(date -u +%T) BURST END rc=$?" >> /root/noswap.log
|
||||
Reference in New Issue
Block a user