installer 1.36.1: http_code prints one status (R-1284, red-proved; committed, not published); R-1285 (BYO drop-in removed one bundle late), R-1286 (demo-hp kimai held since 10-14); release-2026-10-26 evidence: BYO proof, the three boxes on 0.343.0, Homepage gate on the drill

documentation/backlog/OPEN-ITEMS.md

@@ -113,7 +113,7 @@ match what the reader sees is how an instrument stops being believed (R-421). It
 **nothing was proven on the day this line was drawn** and a stopping line that moves a status is a
 stopping line that lies.
 
-## Install & onboarding — 7 rows (P3 5, P4 2)
+## Install & onboarding — 8 rows (P3 6, P4 2)
 
 | ID | Category | Sev | What | State | Blocked on | Next action | Owner |
 |---|---|---|---|---|---|---|---|
@@ -123,6 +123,7 @@ stopping line that lies.
 | **R-1273** | Install & onboarding | P3 | **An install that fails on the image registry's rate limit tells the household only „exit code 1”.** Catalog sweep 2026-10-24, code-server 16:01:37: `lscr.io … toomanyrequests` → the product cleaned up right (R-649) but the event and the card say „Alkalmazás telepítése nem sikerült: Code-Server — exit code 1”; nothing says the download server is busy and a later try works. The same install went through later (`audits/catalog-sweep-2026-10-24/code-server/`). | OPEN | — | Recognise `toomanyrequests` (and a pull timeout) in the deploy error and say „the app's download server is busy — try again in an hour”; a test with the stderr line | CC |
 | **R-494** | Install & onboarding | P4 | **NARROWED 2026-09-14 by operator ruling → [P3-LOW] the hub COULD create the tunnel at customer creation, for a domain already on Cloudflare. Not blocking: every customer has their own domain and the operator creates the tunnel per day-0 A.1 (`architecture/01-topology-and-trust.md`).** *Original finding, kept:* **[P1-HIGH] A new customer's dashboard has NO reachable address unless the operator hand-makes a Cloudflare tunnel — the link in the setup-code mail is dead.** MEASURED 2026-09-14 on a fresh install from the public ISO (drill intervention **I1**): the claim mail points at `https://felhom.drill0242.felhom.eu`; that name has **no A and no AAAA** record (`dig @1.1.1.1`, control `felhom.enkisfelhom.hu` resolves); the hub has **no tunnel- or DNS-creation code** (`hub/internal/cloudflare/` holds only geo-rule removal; `cf_tunnel_token` is a pasted, optional form field, `configs.go:1478`) — day-0 runbook A.1 makes it a manual Cloudflare-dashboard step that nothing on the customer-create page asks for; the box's own split-horizon resolver on the appliance LAN IP answered `google.com` but not the dashboard name at 13:27:39Z; the agent applied the record at **13:27:44Z** (`lanresolver: applied split-horizon record … ip=192.168.0.158`, 3 m 46 s after the controller started), so the box CAN answer the name — **but only to a device that uses the box as its DNS server, and no document, screen or mail tells a household to do that**; the router and the installer-offered DNS answer nothing. The page was reachable only at the guest's LAN address with the name forced (`curl --resolve …:443:192.168.0.158`). **A volunteer could not have done that.** **What it needs:** an operator ruling — the hub creates the tunnel and DNS at customer creation, or the product gives a household a LAN address that works with no DNS change. | **READY — rank P3-LOW; owner: CC** **Re-ranked 2026-10-03: P3→P4: operator-side automation; the operator creates the tunnel by hand per the day-0 runbook.** | — | — | CC |
 | **R-504** | Install & onboarding | P4 | **[P3-LOW] `iso.felhom.eu` cannot show an index page on its own — its root returns 404, and the download page lives on the website instead.** MEASURED 2026-09-14: `https://iso.felhom.eu/` and `/index.html` → 404; only named objects answer. The host is an R2 bucket behind a custom domain; whether R2 would serve an uploaded `index.html` at `/` was **not measured** (uploading anything to the public bucket is a publication). The ISO v1.27.0 task puts the Hungarian download page at `felhom.eu/letoltes` (published with the ISO, after the operator's yes). **Remaining:** a redirect from `iso.felhom.eu/` to that page needs a Cloudflare rule the session has no credential for. | **WAITING-ON-OPERATOR — rank P3-LOW; owner: operator (Cloudflare rule)** **Re-ranked 2026-10-03: P3→P4: households are sent to the website's download page; the bare address is cosmetic.** | — | — | operator |
+| **R-1284** | Install & onboarding | P3 | **The installer's preflight never words a refusal: `http_code` printed the status twice („401401"), so the 401 („passphrase REJECTED"), 404 („customer not found") and 409 (R-1167's live-box sentence) branches never matched — every refusal read „unexpected hub status 401401".** Seen live 2026-10-25 on the BYO test VM (attended release run) with installer 1.36.0: a wrong id read `404404`, a wrong passphrase `401401`. R-1167 was CLOSED 2026-10-20 on a publish whose 409 sentence could not show. With `-f`, curl prints `-w` and exits 22 on a 4xx, and the fallback curl printed the code again (line 1833 already worked around it by keeping the last 3 characters). | OPEN — **fixed on main, NOT published:** installer 1.36.1 (`http_code`: one curl without `-f`, never failing); `test_http_code_prints_one_status_on_a_refusal`, seen failing on the old helper (`audits/release-2026-10-26/redproof/installer-http-code-doubled.txt`). | the publish is a DooPlex change (tag + webpage git-sync pins + the webpage sync) — the operator's | publish installer 1.36.1 (cut `installer-v1.36.1`, bump both `--ref` in `manifests/webpage.yaml`, sync the webpage alone); then a preflight with a wrong passphrase reads „passphrase REJECTED (401)"; then close | operator |
 
 ## Apps & catalog — 17 rows (P3 7, P4 10)
 
@@ -158,7 +159,7 @@ stopping line that lies.
 | **R-683** | App updates | P3 | **[P3-LOW] Watch: after a power cut during an update's health check, the hold named an HOUR-OLD second-drive copy, not the one the update's own backup should have just made.** 2026-09-24 chaos round 3 (nextcloud, `backup_max_age: 1m`): no `backing-up` phase was seen and the hold named Tier 2 at 13:04 for an update pressed at 14:04; the pre-cut controller log was lost with the container (the runner now saves it at arm time — R-320). Round 11, the same action without a power cut, named a fresh 14:34 copy and logged the Tier-2 copy. The sentence was TRUE (it named the copy it offered); the question is why the update did not back up first. Not reproduced; watch the next power-cut drill. `audits/night-2026-09-24/E/round-03*.json`, `E/round-11-controller-pre.log` | **OPEN — P3; owner: CC (watch)** | — | — | CC |
 | **R-785** | App updates | P3 | **[P3-LOW] SparkyFitness is pinned 11 releases and a major behind upstream (v0.17.3; upstream v1.7.3, v1.6.0 dated 2026-07-24).** READ 2026-10-01 (`audits/visitors-2026-10-01/C/bench/C1-previous-tag.txt`). **Needs:** an update walk 0.17 → 1.x through the ladder (bench + box), after R-784 is decided. | **OPEN — rank P3-LOW; owner: CC (after R-784)** | — | — | CC |
 
-## Backup & restore — 59 rows (P1 1, P2 14, P3 26, P4 18)
+## Backup & restore — 60 rows (P1 1, P2 14, P3 26, P4 19)
 
 | ID | Category | Sev | What | State | Blocked on | Next action | Owner |
 |---|---|---|---|---|---|---|---|
@@ -221,6 +222,7 @@ stopping line that lies.
 | **R-1235** | Backup & restore | P3 | **The release copy on ep0 (D33) is proven to load, not yet to restore a registry — and it follows the newest versions, not the ones the fleet needs.** Built 2026-10-23 (`scripts/release-copy/`, `audits/day-2026-10-23/08-release-copy-D33.txt`). (a) `total-loss-of-dooplex.md` „Restore the release copy” steps 2 (skopeo push back, same digest) and 3 (agent packages back) were never walked into a real new registry — only a `docker load` on 9202. (b) The copy keeps the newest 3 image tags and 5 agent versions; it does not ask the hub for the floor and the vouched agent and always include them — a vouch more than 5 releases behind would fall out. (c) The golden (`felhom-golden`, 637 MB for 0.331.0) is not copied: a new install after a DooPlex loss needs it (the brief named images + agent packages only; one golden fits under the 3 GB cap). | OPEN | — | (a) a throwaway registry on demo-hp, push one tag back, compare digests; (b) read `/configuration`'s floor + vouched agent; (c) the operator says whether the golden goes in | CC |
 | **R-1263** | Backup & restore | P4 | **Small items from review round 2:** a LOCAL restore's put-back mails the operator „its off-site restore FAILED” (`felhom-controller/controller/cmd/controller/main.go:1514-1518`, shared via `restore_unit.go:517-518`); Remove — even „keep my data” — deletes undeclared volumes labelled with the app's project, which no tier holds (`internal/stacks/delete.go:763-764`, R-1117); the capped copy's `--delete` reads the source in the daemon's mount view, the emptiness check in the controller's (`tier2.go:834` vs `:464`); stale comments — `felhom-agent/internal/localapi/backup_cap.go:15` („keep-last”) and `restore_crash_putback.go:32` (names a test file that does not exist); the qBittorrent password goes to whatever answers the DNS name `qbittorrent` (`upwatch/explain.go:94,108-113`); kept-copy Remove has a check-to-remove gap (`tier2_kept.go:92-111`); the release-copy restore check trusts hashes stored on ep0 (`runbooks/total-loss-of-dooplex.md`); rrsync without `-munge`/`-wo` (`audits/day-2026-10-23/08-release-copy-D33.txt:6`). | OPEN | — | fix in each repo's next attended pass | CC |
 | **R-1283** | Backup & restore | P3 | **MeTube's downloads are excluded from every backup — make them `optional` (D44 #25).** Catalog `c50adfc` (R-1019) marks the download folders of qBittorrent, Transmission, NZBGet, SABnzbd and MeTube `excluded` (`app-catalog-felhom.eu/templates/metube/.felhom.yml:33`). Risk: a MeTube video may be gone from its source site, so after a drive failure it cannot be fetched again. Pick: MeTube's `media/metube` becomes `optional` — the second-drive copy carries it, the off-site copy does not; NZBGet and SABnzbd stay excluded (re-downloadable). Cost: second-drive space for MeTube's folder. Operator ruling D44 = all picks, 2026-10-25. Note: `architecture/15-media-library.md` §7. | OPEN | — | change the class in the catalog template, run the catalog gates (the download-binds gate and its decoys must accept MeTube as `optional`), check on a Tier-0 box that a second-drive copy carries the folder and the off-site run does not | CC |
+| **R-1286** | Backup & restore | P4 | **demo-hp's kimai has been HELD since 2026-10-14 09:06Z („held after a failed restore whose rollback also failed") and no row names it.** Seen 2026-10-25 by the D47 upgrade count (attended release run): kimai is the one app of 12 on demo-hp without an install id, because the start-up step skips a held app; `app.yaml` says deployed, no container exists, boot reconciliation leaves it held, the night update leg has skipped it since at least 2026-10-16 (`audits/burndown-apps-2026-10-16/P1/night-chain-log.txt`). A test box; the hold is the designed fail-closed state (R-379), but 11 days with no record is how a held household app would go unseen too. | OPEN | — | read why the 2026-10-14 restore and its rollback failed (demo-hp's controller log of that day, if kept; the hold record); then clear the hold (`--clear-restore-hold kimai` + a restart) or remove the app through the product; check that a held app raises a standing operator signal, else file that | CC |
 
 ## Storage & devices — 14 rows (P3 5, P4 9)
 
@@ -273,7 +275,7 @@ stopping line that lies.
 | **R-1280** | Security & access | P3 | **A signed operation's window has no maximum length — cap it at 24 h (D44 #22).** The agent (`felhom-agent/internal/authz/verifier.go`) and the root wrapper (`configs/felhom-os-apply`) check `now ∈ [issued_at, expires_at]` with a 2-minute skew on `issued_at`, but neither checks `expires_at − issued_at`; `felhom-opsign` defaults to 30 min (`cmd/felhom-opsign/main.go:57`) and the nonce store keeps a record until its expiry. Risk: a signed job made with a long window by mistake stays usable for that whole time. Pick: the agent and the root wrapper refuse a window longer than 24 h. Operator ruling D44 = all picks, 2026-10-25. Note: `architecture/04-control-plane-authorization.md` §2. | OPEN | — | one agent change in both checkers + a test that a 24 h + 1 s window is refused (red first) and a 24 h one is accepted; rides an agent release (agent releases stop for the operator's vouch) | CC |
 | **R-1281** | Security & access | P2 | **Every app container can reach FileBrowser directly; the only guard is the secret header name — take FileBrowser off the app networks (D44 #23).** FileBrowser trusts its proxy header (`auth.methods.proxy`); every app container can reach `filebrowser:80` without traefik; the guard is that the header NAME is a per-box secret that traefik's forwardAuth strips from client requests (`felhom-controller/controller/internal/infra/filebrowser_sso.go:15-22`). Risk: an app that learns the name (a hacked app on the box) reads and writes every household file. Pick: FileBrowser joins only the network traefik uses, so no app container reaches it directly. Operator ruling D44 = all picks, 2026-10-25. Note: `architecture/13-threat-model.md` §5. | OPEN | — | a compose/network change in the controller's infra render + a test on the rendered networks; a live check on a Tier-0 box that a forged header from an app container no longer reaches FileBrowser (the 2026-10-18 measurement, now refused) while the dashboard's file manager still signs in; one controller release | CC |
 
-## Box system & updates — 12 rows (P2 1, P3 7, P4 4)
+## Box system & updates — 13 rows (P2 1, P3 7, P4 5)
 
 | ID | Category | Sev | What | State | Blocked on | Next action | Owner |
 |---|---|---|---|---|---|---|---|
@@ -289,6 +291,7 @@ stopping line that lies.
 | **R-1004** | Box system & updates | P4 | **After an unclean stop every guest ext4 volume waits ~43 s in multi-mount protection before it mounts, so each restart after a power cut takes ~1.5 min longer.** Kernel: „EXT4-fs warning (device dm-6): ext4_multi_mount_protect: MMP interval 42 higher than expected, please wait" on dm-6/dm-7 and loop0/loop1, demo-hp and Tester 1, every round of `audits/night-power-2026-10-13/` (R1 `repairs.txt`). | **READY** — filed 2026-10-14 | — | CC: find where MMP is switched on for the guest volumes (Proxmox `pct` create, or our own mkfs), whether it protects anything on a one-host disk, and measure the restart without it on a scratch guest | CC |
 | **R-1013** | Box system & updates | P4 | **After a power cut the agent's start-up stale-lock pass logs an ERROR „pct unlock failed … no lock found" when Proxmox's own start-all removed the lock in the same second.** The outcome is the goal (no lock), so the line is a false alarm in the log. Seen on demo-hp 2026-10-14 12:07:44–45 UTC (`audits/power-cut-fixes-2026-10-14/E/after-boot.txt`; Proxmox: „removed left over backup lock from '9201'!"). Small, but the agent's release for this session is spent (v0.156.1). | **OPEN** — filed 2026-10-14 | — | CC: treat „no lock found" from `pct unlock` as already clear (INFO), with a test; ride the next agent release | CC |
 | **R-1061** | Box system & updates | P4 | **A per-customer floor reached Tester 1 only at its next 15-minute report, not in seconds.** Set 2026-10-15 12:55:51 UTC for tester-1, demo-hp and demo-felhom together (hub 0.153.0, CC's token): demo-hp and demo-felhom ran 0.314.0 within 13 s (the hub's wake); Tester 1 moved at 13:09:35, its regular report (`audits/gate-restore-2026-10-15/release/03-boxes-move.txt`). It had restarted at 12:54:29 onto rc.1 and logged „hub wait channel active". Why the wake did not reach it is not read (the wake line is DEBUG). No harm: the floor arrived. | **OPEN** — filed 2026-10-15 | — | Read Tester 1's DEBUG ring at the next floor change; compare with the hub's bump log | CC |
+| **R-1285** | Box system & updates | P4 | **D43's removal of our SSH drop-in from a BYO host happens one bundle LATE: the bundle run that delivers agent 0.165.0 is planned by the box's OLD (0.164.0) wrapper, which writes the drop-in as before („same"), and only then replaces itself.** Measured 2026-10-25 on the BYO test host (VM 9371 on demo-hp, `Tester4-f967d4`; attended release run): 0.164.0 day-0 → signed `agent_update` + `agent_config_update` 0.165.0 → the planted drop-in still there; a second `agent_config_update` (same bundle) → `BUNDLE REMOVED … (ours, on a BYO host — D43)`, nothing written, `sshd -T` the owner's own `permitrootlogin yes` (`audits/release-2026-10-26/byo/byo-proof.txt`). No box is affected today (the fleet's only BYO host is this test host); a fresh BYO install on ≥ 0.165.0 runs the new wrapper from the start. | OPEN | — | either the wrapper plans again after it replaced itself (one agent change + a test that a 0.164.0→0.165.0 bundle on a BYO record removes our copy in ONE run, red first), or the release procedure sends a BYO box's config bundle twice; until then a BYO box upgraded from ≤ 0.164.0 keeps our drop-in until its next bundle | CC |
 
 
 ## Monitoring & notifications — 22 rows (P2 1, P3 15, P4 6)

documentation/backlog/STATUS-HISTORY.md

@@ -7,6 +7,10 @@ Moved here byte for byte on 2026-10-14 (night session), newest first, so that `S
 
 ## Moved from STATUS on 2026-10-25 (attended release run)
 
+The Monday list, run on 2026-10-25 (attended; results in `REPORT-release-2026-10-26.md`):
+
+**Monday 2026-10-26, release list (attended).** 1. Controller v0.343.0: the restore and backup fixes (R-1251–R-1253, R-1269–R-1271), R-1250. If not: the P1 stays open. 2. Agent v0.165.0 + your vouch: BYO keeps its SSH (R-1257). 3. Hub v0.170.0: the recovery package in one step (R-1254). 4. Catalog: n8n usage data off; OpenGist 256 MB.
+
 Decided: **D44 = all picks**, **D45 = all picks** (operator, 2026-10-25; R-1265 and R-1266 closed, the four code picks are R-1280–R-1283).
 
 | D45 | R-1266 | Seven places where a design document says one thing and the code does another. One line each, with a pick: `documentation/audits/review-round-2-2026-10-24/D44-D45-picks.md`. Answer „all picks" or name the ones you disagree with. | **Yes — the text follows the code** (each is how the system works today; you read every changed sentence) | the code follows the text: six code changes, one of them to the box's door for you | the documents keep saying what is not true | — |