On startup reconcile the hub-served offsite: descriptor into a key-only offbox
target. internal/offsiteapply.Bridge: verify-pin box host key vs host_fingerprint
(NO blind TOFU) → consume the one-time password (single-use, never logged) →
sshpass ssh-copy-id -s -f install + verify → configure offbox → EscrowState=pending
(fork-4 via Manager.ApplyOffsiteTarget) → persist a descriptor-hash marker LAST.
Idempotent + fail-safe. Seams faked in tests; both red-proofs run+reverted.
Dockerfile + sshpass. NOT yet live-applied (supervised end-to-end next runbook).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PSK5g6qYLknKj8u3QAFEr6
loadAndParse + LoadFromBytes ran os.ExpandEnv over the whole YAML before parse;
a bcrypt hash ($2a$10$...) is full of $word sequences that get replaced with
empty env values, silently corrupting web.password_hash on load (a silent
auth-integrity bug: $2a$10$N9qo8uL... -> "a0"). Remove both ExpandEnv calls;
parse raw bytes. The typed applyEnvOverrides path (FELHOM_WEB_PASSWORD_HASH) is
the sanctioned env mechanism and is unchanged. Tests + red-proof.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PSK5g6qYLknKj8u3QAFEr6
Gap 1: third shim listener :2526, plaintext, does NOT advertise STARTTLS (TLSConfig
nil) — for opportunistic-STARTTLS clients with no cert-skip (cal.com, nextcloud).
Gap 2: SMTPMapping tls_mode (picks port 2525/2526/2465) + from_domain_var (split
local-part + domain for nextcloud's MAIL_FROM_ADDRESS/MAIL_DOMAIN). Default keeps
existing apps on 2525. Hub untouched.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Bug fixes:
- Add applyEnvOverrides to LoadFromBytes (M05)
- Set state=failed on compose-up failure in selfupdate (M16)
- Clamp usableMB to min 0 in memory check (M22)
- Remove "manual" schedule from triggerAllCrossBackups (M23)
- Add mmcblk device handling for partition paths (M21)
- Fix stripPartition for mmcblk devices (L25)
- Fix TruncateStr for UTF-8 and negative maxLen (L05/L06)
- Fix AllDone to return false for empty restore plans (L14)
- Fix PushOnce to return actual errors (L39)
- Restore pending events on save failure in DrainPendingEvents (M03)
- Add duplicate check in AddStoragePath (M04)
- Call CleanupTempMounts after drive scan (H13)
- Log SetStep save errors (M25)
Hardening:
- Guard scheduler Start() against double-start (M14)
- Acquire mutex in scheduler Stop() before reading cancel (L24)
- Cap log lines parameter to 10000 (L31)
- Require POST for logout (L32)
- Use sync.Once for Server.Close() (L49)
- Panic on crypto/rand.Read failure in setup CSRF (L40)
- Validate Bearer token against Hub API key in CSRF (H16 fix)
- Replace custom hasPrefix with strings.HasPrefix (L13)
- Replace simpleHash with crc32.ChecksumIEEE (L48)
Cleanup:
- Remove dead imageName function (L02)
- Remove dead detectHostIPViaRoute function (L03)
- Rename shadowed copy variable to cp (L07)
- Copy DefaultEnabledEvents in GetNotificationPrefs early return (L09)
- Update BUGHUNT.md with comprehensive audit results
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Add internal/assets package that downloads and caches app assets from
Hub API with SHA-256 change detection. Assets resolve from synced cache
first, falling back to baked-in directory. Daily sync schedule +
on-demand POST /api/assets/sync endpoint.
Config: assets.sync_enabled + assets.sync_schedule (default 05:00)
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
New controller features:
- Web-based setup wizard replaces docker-setup.sh interactive config
- Dual listener: :8080 (Traefik) + :8081 (direct HTTP for LAN)
- Drive scanner finds .felhom-infra-backup/ on all block devices
- Hub recovery pull (GET /api/v1/recovery/{id}) with retrieval password
- Fresh install: Hub config download or manual wizard
- CSRF protection, state persistence, Hungarian UI
- Local infra backup written to all connected drives after each backup cycle
- .felhom-infra-backup/backup.json + metadata.json with SHA256 checksum
- Hub verification: parse customer_blocked from report push response
- Limited mode after 7 days without verification
- Recovery info page on Settings + recovery-info.txt file generation
- Pending events queue: DR events sent to Hub on next report push
- docker-setup.sh v6.0.0: removed interactive wizard, minimal controller.yaml only
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- POST /api/config/apply: accepts YAML body from Hub, validates and
writes controller.yaml atomically (tmp+rename)
- GET /api/config/hash: returns SHA256 hash of current config file
- Report payload now includes config_hash field for Hub comparison
- Config endpoints use same dual auth as self-update (session OR Bearer)
- config.LoadFromBytes() for validation without file I/O
- config.FileHash() helper for SHA256 computation
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Major refactor of backup and storage paths:
- Per-drive restic repos at <drive>/backups/primary/restic/
- Per-app DB dumps at <drive>/backups/primary/<app>/db-dumps/
- Remove global BackupDir, DBDumpDir, ResticRepo config fields
- Add SystemDataPath config (fallback for apps without HDD)
- New backup/paths.go with pure path computation helpers
- Add GetStackHDDPath to StackDataProvider interface
- Restic methods now accept repoPath as parameter
- Cross-drive backup uses new secondary path structure
- Rename storage/ to appdata/ in scripts and compose templates
- Update protected HDD paths (storage → appdata + backups)
- Simplify backup UI (remove global path displays)
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Phase 2 (Monitoring & Health):
- Central job scheduler replacing ad-hoc goroutines (internal/scheduler)
- CPU usage collector via /proc/stat background sampling (internal/system/cpu_linux.go)
- Temperature reading from /sys/class/thermal + /host/sys (Docker mount)
- Load average from /proc/loadavg
- Healthchecks.io-compatible HTTP pinger (internal/monitor/pinger.go)
- System health checks: disk, memory, CPU, temp, Docker, protected containers (internal/monitor/healthcheck.go)
Phase 3 (Backups):
- Database auto-discovery via docker ps + docker inspect (internal/backup/dbdump.go)
- Database dumping via docker exec (pg_dump / mariadb-dump) with atomic writes
- Restic backup integration with auto-password generation (internal/backup/restic.go)
- Backup orchestrator: DB dumps + restic snapshots + weekly prune (internal/backup/backup.go)
- Manual backup trigger via dashboard button and POST /api/backup/run
Dashboard UI:
- CPU usage bar with load average display
- Temperature with colored indicator dot
- Backup status card with last run time, DB count, repo stats
- "Mentés most" button for manual backup trigger
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
admin