SMBSettings + SMBShare registry in settings (password never stored — only UserSet);
NetBIOS-safe name validation. Pure infra renderers: RenderSambaConfig (hardened
global block: SMB2 floor, bind interfaces only=lo eth0, disable netbios=no, force
user block) + RenderSambaCompose (network_mode host, pinned image, :ro bind for
read-only shares, passdb volume). Exact smb.conf golden + CRUD/validation tests.
After a completed escrow ceremony the Távoli mentés page showed the yellow
"Helyreállítási kód szükséges" card for ~15 min until the next hub-report ACK
flipped pending→escrowed. Phase-0 diagnosis (read-only) = verdict A (report-cycle
lag), already resolved on the demo box (escrow_state:"escrowed"); hub Hypothesis B
verified false (SaveHostEscrow ON CONFLICT already clears stale_at on upload) → no
hub change.
- settings.OffboxTarget.CeremonyCompletedAt: stamped on the recovery-code claim,
zeroed on the auto-confirmer Flip + the deprecated manual confirm; persisted.
- web/handlers.go: offboxCeremonyWaitState + escrowCeremonyGraceWindow (35m).
- backups_remote.html: info "megerősítésre vár, legfeljebb 15 perc" card → warn
"a megerősítés nem érkezett meg" past the window. Existing branches untouched.
- backups_escrow.html: "Mi történik ezután?" note on the wizard's final step.
- Test web/escrow_wait_state_test.go (truth table + red-proof recorded in REPORT).
No scheduler/agent/hub/endpoint changes.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017qDiBqKKQ5vPB5fXBqu7Kp
tier2_capture.go: classified apps get TierSecondary per-bind legs (paperless copy shrinks — export
drops); legacy apps keep the byte-identical resolver set. v2 relpath-mirroring layout
(backups/secondary/<stack>/{marker LAST, recovery-unit/, hdd/<rel>/, userdata/<rel>/}); N>1 native
(errTier2MultiDir/tier2AppDataName deleted). Migration=delete-and-rebuild + reconcile; all RemoveAll
via tier2SafeRemove (refuses outside backups/secondary/). SSD=state-only tier. selectTier2Target
never picks network storage (pinned+auto, F-6C-1). Restore reads v2 behind a marker gate.
Part 0: offbox_enlarge_blocked is a persisted one-time Load seed (opt-out sticks), not a getter
append. Part 0.5: offsite restore scratch prefers a local (non-network) path.
Full v2 test suite + all 10 §10 red-proofs verified. Destructive writes bounded to backups/secondary/.
PlaceOffsiteRestore: live target via raw GetStackHDDPath not AppNamespaceRoot (F-3a-1a: no SSD
merge; undeployed refused), placement headroom gate (F-3a-1b), stat pre-pass over all placements
before any copy (F-3a-4: no partial writes), scratch removed on success/kept on failure (F-3a-2).
mapOffsiteRestorePaths refuses the namespace root itself (F-3a-3).
Delivery chain: DefaultEnabledEvents + GetNotificationPrefs append-if-absent migration + settings
checkbox + handler slice; paired with hub v0.55.0 allowlist (no customerMessages entry — raw
dynamic message survives). +8 tests; all 6 controller §10 red-proofs verified.
The customer sets + owns the dashboard password via a hub-emailed one-time
claim code. An unclaimed box (code hash present, no password) serves ONLY the
claim page — every other route → claim page (302) or 401, so a Day-0 box is
never open on the internet. A set password disables the gate (auth wins).
Reset rides the same code engine (login "Elfelejtett jelszó"). Legacy-open
(no password, no hash) shows a red transition banner until the hub delivers a
hash. Report ACK caches the code state idempotently by generation; report
carries claimed (set-only). --print-reset-code root escape hatch. Requires
hub v0.50.0. Gate-coverage signature test + 4 red-proofs proven.
QuotaGB rides the descriptor into OffboxTarget; RepoSizeBytes persisted
from restic stats. Pre-run gate: >=100% refuses NEW backups (Hungarian
notice + operator alert) but prune STILL runs (red-proofed) and restore is
never gated; >=80% warns. /backups usage bar (quota>0 only). The hub
report gains the non-secret offsite status object for the OffsiteChecker.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PSK5g6qYLknKj8u3QAFEr6
Pairs with agent v0.77.0. StageEscrowSecret pushes the repo password to the
agent (POST /escrow/stage-secret) at offsite-enable → EscrowState="pending".
Atomicity gate: RunOffboxBackup (scheduler + handler) refuses until
EscrowState="escrowed" (operator POST /backup/offbox/confirm-escrow after the
escrow ceremony) — no un-recoverable offsite ciphertext can exist. DR:
POST /backup/offbox/inject-password pre-places a recovered 64-hex password 0600
(honored by WriteOffboxSecrets' IsNotExist guard; refuses clobber without
force). DR recipe gains non-secret offsite_restic coords (DRResticCoord); SFTP
key regenerated at DR, not escrowed. New settings.OffboxTarget.EscrowState.
Tests + atomicity & inject companion red-proofs green; UI gates pass. NOT yet
live-validated (supervised ceremony).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PSK5g6qYLknKj8u3QAFEr6
offbox located each toggled app's recovery unit via AppNamespaceRoot→GetAppDrivePath,
which reads the app's LIVE app.yaml HDD_PATH and silently falls back to systemDataPath
when the app isn't deployed → looked on the wrong drive, backed up nothing, reported
ok/0 (DIAG root cause). Now:
- discoverOffboxUnit/offboxCandidateNSRoots scan the durable storage registry
(schedulable non-decommissioned paths ∪ systemDataPath) for backups/primary/<app>,
independent of deploy state; newest-by-manifest-CreatedAt wins on drive churn.
- RunOffboxBackup: runOffboxInternal returns (backedUp, missing, err); 0-of-N toggled →
hard error + operator alert; partial → ok + new OffboxTarget.LastWarning (shown on
/backups, preserved across config edit).
- AppNamespaceRoot + primary WRITE paths unchanged.
- 6 non-hollow tests (A-E + edge) + both companion red-proofs run (reverted).
- NOT yet live-validated against the Storage Box (spike creds torn down).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PSK5g6qYLknKj8u3QAFEr6
PushResponse.ConfigVersion from the report ACK; ConfigRefresher reconciles vs.
the last-applied version (settings.applied_config_version) and on a change calls
bootstrap.RefreshConfig (re-pull controller.yaml + re-merge local_api) then
GracefulSelfRestart. First-run records baseline (no restart); unchanged = no-op
(no storm); failed pull keeps config + retries. Companion to hub v0.26.0.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HxLA1mZurFq9kt8hneFeCs
Encrypted restic repo over SFTP for the app-data tier (the off-site 3-2-1 leg). A dead
NAS fails fast via -oConnectTimeout (spike Q8), never hangs the runner; secrets are 0600
files (ride DR via PBS whole-CT); init-if-absent, retention forget --prune, restore,
single-flight, per-app toggle + UI. restic re-added to the image.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HxLA1mZurFq9kt8hneFeCs
Controller-side of NAS network storage, proxying to agent A1 /netstorage/*. Distinct
'network' storage kind (no drive lifecycle); add/list/remove + per-share health UI;
unreachable NAS is a recoverable warning, never the drive missing/stop cascade; SMB
creds pass through to the agent, never persisted.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HxLA1mZurFq9kt8hneFeCs
Drives are visible in-guest only at the STABLE /mnt/felhom-drives/<name>; the
registered path + HDD_PATH + FileBrowser source repoint there while agent calls
map back to raw /mnt/<name> (agentWhere). Enroll binds-under-parent before
register. Drive-absent GATE (planDriveGates + 30s driveGateLoop) stops/blocks
apps when a drive vanishes and auto-restarts on return; start-gate refuses start
when the drive is absent. H1 endpoints (disconnect/reconnect/restart-apps) routed
onto host-side ops. Non-hollow tests + companions.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
A1: AutoDiscoverStoragePaths no longer bails on a non-empty registry;
registers only deployed-app paths missing from the registry. Never
mutates/removes existing entries, never re-adds or reactivates a path
present in ANY state (incl. Decommissioned), never flips IsDefault.
A2: InferStorageLabel maps base==felhom-data namespace dir to
'Belső SSD (rendszer)' to disambiguate the internal system volume.
Table-driven tests incl. a companion that fails without the
skip-by-presence guard.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
ListDumpFiles ran ValidateDump (line-by-line scan) for every dump on every ~5-min
RefreshCache cycle — wasted I/O+CPU on large customer dumps. ListDumpFiles now takes
an optional cached(name,size,mod) lookup; on a (size+modtime) match it reuses the
prior result and skips ValidateDump. settings.DBValidationCache gains Size+ModTime;
listAllDumpFiles builds the lookup from the persisted cache and writes back only fresh
validations (cache miss), so an unchanged dump triggers neither a re-validation nor a
settings.json write each cycle. nil cached = legacy validate-always (back-compat).
Tests: cache-hit skips validate (sentinel), cache-miss validates, nil validates.
Part A of the UI-fixes/storage-spike spec.
A1: enrichHostStorageTargets sorts /api/host-metrics storage_targets
server-side and attaches friendly Hungarian labels + purpose, fixing the
#host-storage-bars reorder-on-poll bug. Display labels only — PVE storage
ids are never renamed.
A2: new GET/POST /stacks/{name}/backup Tier-2 config panel; the "2. mentés"
Beállítás button is repointed there from the dead-end deploy page. Customer
can pin a target drive or disable Tier 2; preference is preserved across the
runner's status writes. Always visible (single-SSD + non-HDD apps included).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Deactivated drives (Schedulable=false) now treated like disconnected for
Tier2 backups. New IsStoragePathSchedulable() checks active+connected+not
decommissioned. UI shows yellow "Cél meghajtó inaktív" badge, scheduler
skips silently with WARN log.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Previously, removing a storage drive from the controller only marked it as
disconnected if the StoragePath entry still existed with Disconnected:true.
Drives removed entirely from storage_paths were invisible to the check,
causing Tier2 backup UI to show green "Sikeres" and scheduler to attempt
backups to a no-longer-managed destination.
New IsStoragePathKnown() method covers both cases. UI shows yellow
"Cél meghajtó leválasztva" and scheduler skips silently.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Add structured operational logging at INFO, WARN, and ERROR levels to
every controller module. Standardize custom prefixes ([GEO], [SCHED],
[SYNC]) to use [INFO/WARN/ERROR] [module] format. Fix misleveled logs
(WARN->ERROR for data loss scenarios, WARN->INFO for routine operations).
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Add detailed [DEBUG] logging to every controller module when
logging.level is set to "debug". Each module with stateful debug
uses SetDebug(bool) wired from main.go. Covers stacks, backup,
cloudflare, integrations, system, monitor, settings, scheduler,
web handlers, storage, metrics, API, selfupdate, and assets.
Also includes the app export/import (.fab bundles) feature from
v0.32.0 and its debug page integration.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Generic integration system for connecting deployed apps via toggle UI.
First handlers: OnlyOffice→FileBrowser (config.yaml patch) and
OnlyOffice→Nextcloud (occ CLI). Lifecycle hooks auto-suspend on
stop and re-apply on start.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Bug fixes:
- Add applyEnvOverrides to LoadFromBytes (M05)
- Set state=failed on compose-up failure in selfupdate (M16)
- Clamp usableMB to min 0 in memory check (M22)
- Remove "manual" schedule from triggerAllCrossBackups (M23)
- Add mmcblk device handling for partition paths (M21)
- Fix stripPartition for mmcblk devices (L25)
- Fix TruncateStr for UTF-8 and negative maxLen (L05/L06)
- Fix AllDone to return false for empty restore plans (L14)
- Fix PushOnce to return actual errors (L39)
- Restore pending events on save failure in DrainPendingEvents (M03)
- Add duplicate check in AddStoragePath (M04)
- Call CleanupTempMounts after drive scan (H13)
- Log SetStep save errors (M25)
Hardening:
- Guard scheduler Start() against double-start (M14)
- Acquire mutex in scheduler Stop() before reading cancel (L24)
- Cap log lines parameter to 10000 (L31)
- Require POST for logout (L32)
- Use sync.Once for Server.Close() (L49)
- Panic on crypto/rand.Read failure in setup CSRF (L40)
- Validate Bearer token against Hub API key in CSRF (H16 fix)
- Replace custom hasPrefix with strings.HasPrefix (L13)
- Replace simpleHash with crc32.ChecksumIEEE (L48)
Cleanup:
- Remove dead imageName function (L02)
- Remove dead detectHostIPViaRoute function (L03)
- Rename shadowed copy variable to cp (L07)
- Copy DefaultEnabledEvents in GetNotificationPrefs early return (L09)
- Update BUGHUNT.md with comprehensive audit results
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Add country-based access control managed through the Settings page.
Global allow-list with per-app overrides, searchable country selector,
automatic sync to Cloudflare WAF on settings change / deploy / remove,
plus periodic 6-hour verification.
New package: internal/cloudflare/ (client, zone, waf, countries, geosync)
New API: /api/geo/* (6 endpoints) + /api/stacks/{name}/geo/override
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
New controller features:
- Web-based setup wizard replaces docker-setup.sh interactive config
- Dual listener: :8080 (Traefik) + :8081 (direct HTTP for LAN)
- Drive scanner finds .felhom-infra-backup/ on all block devices
- Hub recovery pull (GET /api/v1/recovery/{id}) with retrieval password
- Fresh install: Hub config download or manual wizard
- CSRF protection, state persistence, Hungarian UI
- Local infra backup written to all connected drives after each backup cycle
- .felhom-infra-backup/backup.json + metadata.json with SHA256 checksum
- Hub verification: parse customer_blocked from report push response
- Limited mode after 7 days without verification
- Recovery info page on Settings + recovery-info.txt file generation
- Pending events queue: DR events sent to Hub on next report push
- docker-setup.sh v6.0.0: removed interactive wizard, minimal controller.yaml only
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Phase 1: Deprecate restic as Tier 2 method (rsync only), auto-migrate on startup
Phase 2: Enhanced per-app migration with backup awareness, DB dump copy, auto-cleanup
Phase 3: Full drive migration with decommissioned state, rollback support, wizard UI
Phase 4: Hub report includes decommissioned drive state
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Fix 1: HDD data backup is now mandatory for all deployed apps.
resolveAppBackupPaths() iterates ListDeployedStacks() directly — no
longer reads GetAppBackupMap() or checks the Enabled flag. DiscoverAppData()
drops backupPrefs parameter; BackupEnabled is set from HasHDDData.
Five dead settings methods removed: IsAppBackupEnabled, SetAppBackup,
GetAppBackupMap, SetAppBackupBulk, GetAppBackupPrefs.
Fix 2: Cross-drive backup now triggers a fresh DB dump (DumpStackDB)
before running. DBDumper interface added to crossdrive.go; Manager
implements it; SetDBDumper wired in main.go. Non-fatal — proceeds with
user data backup even if DB dump fails.
Fix 3: Restore dropdown shows ALL deployed apps (not just HDD+enabled).
restore.go rewritten: always restores config+DB, adds user data if hasHDD.
UI shows restore type banner (full / config+DB / config only) with
color-coded styling. Snapshot API clarified for non-HDD apps.
Fix 4: "Docker kötetek" → "Konfiguráció" — named volumes are not in
the restic backup paths; compose files + app.yaml are what's backed up.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Health severity fix: mount-point check downgraded from issue (FAIL) to warning (WARN)
- All storage health messages translated to Hungarian
- Success flash messages for all storage operations
- Edit storage path labels (inline edit UI + backend)
- App details per storage path on settings page (expandable list with names + sizes)
- Storage badge on stacks page showing which storage each app uses
- Deploy dropdown with free space display and low-space warning (<20%)
- Filesystem & disk info on settings page (ext4/btrfs, device, model via findmnt)
- Backup page storage context with per-app storage label badges
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Fix backup toggles not appearing (read each app's own HDD_PATH from app.yaml)
- Storage paths registry in settings.json with auto-discovery from deployed apps
- Settings page "Adattárolók" section with disk usage, add/remove/default/schedulable
- Deploy page path field as dropdown of registered storage paths
- Health check storage monitoring (mount point, disk usage alerts)
- Mount-point validation utilities (Linux syscall + cross-platform stubs)
- Controller docker-compose mount changed to /mnt:/mnt:rw for multi-storage
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Monitoring page: "Távoli monitoring" section showing healthcheck ping UUID
configuration status (configured/not configured) for each of the 5 pings
- Alert manager: persistent dashboard banners on all pages generated from
health check results, missing pings, and backup status
- Notification system: controller-side notifier sends events to hub relay,
with cooldown tracking and event-type filtering
- Notification preferences UI: email, event checkboxes, cooldown settings
on the settings page with test email functionality
- Settings refactored: shared settingsData() helper, NotificationPrefs
struct with getter/setter and defaults
New files:
- controller/internal/web/alerts.go (AlertManager)
- controller/internal/notify/notifier.go (hub notification client)
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- New settings.json persistence layer (internal/settings/settings.go)
- Atomic write (tmp + rename), thread-safe with sync.RWMutex
- Stores password hash overrides and DB validation cache
- Auto-creates on first save, graceful handling if missing
- Auth improvements
- Password resolution priority: settings.json > controller.yaml > none
- Session duration extended to 7 days (was 24h)
- ?next= redirect after session expiry (returns to original page)
- Flash messages on login page (used after password change)
- Conditional logout link (hidden when auth disabled)
- Session invalidation on password change
- New Settings page (/settings)
- Read-only system config display (customer, domain, git, backup, monitoring)
- Password change form with validation (min 8 chars, match check)
- Sidebar "Beállítások" item pinned to bottom above version
- DB validation persistence
- Validation results saved to settings.json after each dump
- Cached data survives container restarts
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
admin